Most Kenmore dryer repairs in Bennettsville involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Bennettsville work on Kenmore dryers every week.
Kenmore Dryer Repair Near Bennettsville
Our data shows 40 appliance repair companies inside a 60-mile radius of Bennettsville. The rest are spread across Fayetteville (11), Florence (4), and Lumberton (4). Distances run up to about 54 miles. No company within 60 miles of Bennettsville names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Garrell Appliance Service is the nearest, roughly 11.8 miles from Bennettsville. Rated companies nearby average 4.0 stars across 37 businesses. Bennettsville is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Bennettsville. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Kenmore | 0 |
|---|---|
| Repair companies inside 60 miles | 56 |
| Listing Saturday hours | 21 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Three nearest companies, miles away | 11.8, 12.4, 12.6 |
| Show laundry appliance work | 10 |
At the top of the Bennettsville list: Sears Appliance Repair (76.7 miles away, based in Dunn, 4.6 stars from 128 reviews, lists Saturday hours); Sears Appliance Repair (62.7 miles away, based in Lugoff, 4.3 stars from 46 reviews, lists Saturday hours); A1 Appliance Repair (12.6 miles away, based in Cheraw, 5.0 stars from 11 reviews); Sears Appliance Repair (30.9 miles away, based in Florence, 4.5 stars from 211 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
- Burning or hot smell during a cycle
How a Dryer Service Call Usually Goes in Bennettsville
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Local Notes for Bennettsville
Most dryer calls in Bennettsville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
South Carolina has no standalone gas piping license; gas lines serving gas-fired equipment are installed under mechanical classifications such as Plumbing, Heating and Packaged Equipment issued through the Department of Labor, Licensing and Regulation. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
Hiring a Dryer Repair Company in Bennettsville
- Do you work on gas dryers, and who handles anything involving the gas line?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Bennettsville, SC
What makes a dryer stop heating?
Do you work for Kenmore?
Is my Kenmore dryer worth repairing?
What should I do about a Kenmore error code?
Other Dryer Repair in Bennettsville
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Bennettsville technician bring the right parts.