A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Benbrook
Our data shows 40 appliance repair companies inside a 30-mile radius of Benbrook. 2 list an address in Benbrook, and other nearby bases include Fort Worth (34), Crowley (3), and River Oaks (1). The farthest listed company is about 9 miles out. Nearest on the list: C&J Appliance Installations Fort Worth, around 0.8 miles out. No company within 30 miles of Benbrook names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.7 stars across 36 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 30 miles | 60 |
|---|---|
| Open on Saturdays (per listing) | 41 |
| List dryer or washer & dryer work | 14 |
| Three nearest companies, miles away | 0.8, 1.6, 1.9 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
| Mention Kenmore | 0 |
Closest matches for Benbrook: Sears Appliance Repair (87.6 miles away, based in Gatesville, 4.5 stars from 96 reviews, lists Saturday hours); Oliver Dyer's Appliance (3.2 miles away, based in Fort Worth, 4.8 stars from 1,140 reviews, lists Saturday hours); Superior Appliances Repair of Fort Worth (9.0 miles away, based in Fort Worth, 4.7 stars from 228 reviews, lists Saturday hours); Sears Appliance Repair (4.6 miles away, based in Fort Worth, 4.5 stars from 292 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Around Benbrook
Most dryer calls in Benbrook come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Dryer Repair Company in Benbrook
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Benbrook, TX
Should I repair or replace my Kenmore dryer?
What makes a dryer stop heating?
Why does my Kenmore dryer show an error code?
Other Dryer Repair in Benbrook
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Benbrook technician bring the right parts.