Most Kenmore dryer repairs in Denton involve the same few systems: heat, airflow, the drum drive and the controls. The Denton list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Denton work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Denton TX
Within 30 miles of Denton there are 40 appliance repair companies in our data. 11 list an address in Denton, and other nearby bases include Lewisville (6), Little Elm (4), and Frisco (4). Distances run up to about 17 miles. Texas True Appliance Repair is the nearest, roughly 0.3 miles from Denton. No company within 90 miles of Denton mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.4 stars across 34 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 0.3, 0.5, 0.6 |
|---|---|
| Companies within 30 miles | 60 |
| List dryer or washer & dryer work | 24 |
| Listing Saturday hours | 40 |
| Mention Kenmore | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 23 |
Closest matches for Denton: Got Your 6 Appliance Repair LLC (0.5 miles away, 5.0 stars from 367 reviews); Got your 6 appliance repair (8.8 miles away, based in Ponder, 5.0 stars from 513 reviews); J&J Appliance Service (1.0 miles away, 5.0 stars from 495 reviews); Texas True Appliance Repair (0.3 miles away, 5.0 stars from 54 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
- Drum will not turn even though you hear a hum
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Any error code on the display
What Denton Owners Should Know
Most dryer calls in Denton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Denton Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Denton, TX
Should I repair or replace my Kenmore dryer?
Why is my dryer running but not heating?
How do I find a technician who knows Kenmore dryers?
Why does my dryer take so long to dry?
Related Repair Pages for Denton
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Denton technician bring the right parts.