Most Kenmore dryer repairs in Corinth involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Corinth, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Corinth
We found 40 appliance repair companies within 30 miles of Corinth. The rest are spread across Denton (11), Lewisville (10), and Little Elm (4). The farthest listed company is about 12 miles out. The closest is AGB Appliance Repair, about 2.5 miles away. None of the repair companies near Corinth name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 32 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 40 |
|---|---|
| Mention Kenmore | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Companies within 30 miles | 60 |
| Show laundry appliance work | 22 |
| Three nearest companies, miles away | 2.5, 3.0, 3.0 |
The leading options for Corinth are Got Your 6 Appliance Repair LLC (6.2 miles away, based in Denton, 5.0 stars from 367 reviews); OEM & Appliance Repair (11.0 miles away, based in Lewisville, 4.9 stars from 168 reviews, lists Saturday hours); AGB Appliance Repair (2.5 miles away, based in Denton, 4.8 stars from 636 reviews, lists Saturday hours); J&J Appliance Service (7.4 miles away, based in Denton, 5.0 stars from 495 reviews).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Cycles take two or three runs to finish
- Outside of the cabinet gets unusually hot
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Around Corinth
Most dryer calls in Corinth come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Corinth
- Can you look at the washer on the same visit if it is acting up too?
- What guarantee do you give on parts and labor?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Corinth, TX
Should I repair or replace my Kenmore dryer?
How do I find a technician who knows Kenmore dryers?
Why does my Kenmore dryer show an error code?
Other Dryer Repair in Corinth
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.