A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Maplewood, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near Maplewood
40 repair companies serve Maplewood from within 30 miles. Other nearby bases include Tacoma (10), Bremerton (8), and Federal Way (6). The farthest listed company is about 15 miles out. Renvoriq Appliance Repair Tacoma is the nearest, roughly 9.0 miles from Maplewood. No company within 30 miles of Maplewood names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 20 rated companies, the average public rating is 4.6 stars.
Companies are shown by relevance and distance from Maplewood. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Three nearest companies, miles away | 9.0, 9.2, 9.4 |
|---|---|
| Companies within 30 miles | 60 |
| Mention Kenmore | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Show laundry appliance work | 10 |
| Listing Saturday hours | 34 |
Closest matches for Maplewood: Sears Appliance Repair (50.7 miles away, based in Chehalis, 4.4 stars from 134 reviews, lists Saturday hours); HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (10.5 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); Roman’s Appliance Repair Pro (15.4 miles away, based in Seattle, 4.9 stars from 117 reviews, lists Saturday hours); A&H Appliance and Home services (11.6 miles away, based in Federal Way, 4.9 stars from 35 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
What Gets Fixed on a Maplewood Dryer Call
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Maplewood
Most dryer calls in Maplewood come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
Washington's state plumber certification law defines plumbing as potable water, waste, medical gas and similar systems and does not list fuel gas piping, so gas line work is not part of the state plumber certificate. Source: Chapter 18.106 RCW, Plumbers
How to Choose a Dryer Technician Near Maplewood
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
- Can you give a written estimate before ordering parts?
Kenmore Dryer Repair FAQs: Maplewood, WA
Why does my Kenmore dryer show an error code?
Is this Kenmore customer service?
Should I repair or replace my Kenmore dryer?
Related Repair Pages for Maplewood
Kenmore Dryer Repair Near Maplewood
Write down any error code your Kenmore dryer shows and when it appears. It helps a Maplewood technician bring the right parts.