Most Kenmore dryer repairs in Seattle involve the same few systems: heat, airflow, the drum drive and the controls. The Seattle list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Seattle
Our data shows 40 appliance repair companies inside a 30-mile radius of Seattle. 33 list an address in Seattle, and the rest are spread across Bellevue (5) and Mercer Island (2). Five Star Appliance Repair is the nearest, roughly 0.3 miles from Seattle. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.8 stars across 37 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 42 |
|---|---|
| Mention Kenmore | 0 |
| Show laundry appliance work | 12 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.3, 0.5, 0.5 |
Closest matches for Seattle: Sears Appliance Repair (71.1 miles away, based in Chehalis, 4.4 stars from 134 reviews, lists Saturday hours); Puget Sound Appliance Tech (2.0 miles away, 4.9 stars from 57 reviews, lists Saturday hours); Appliance Pro Repairs (1.6 miles away, 4.6 stars from 660 reviews, lists Saturday hours); Smila appliance repair (1.2 miles away, 5.0 stars from 22 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Burning or hot smell during a cycle
- Dryer shuts off a few minutes into the cycle
- Squealing, thumping or grinding while it runs
What Gets Fixed on a Seattle Dryer Call
Care Kenmore Recommends for Its Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Any error code on the display
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Around Seattle
Gas dryers in Seattle are typically served by Puget Sound Energy. If you ever smell gas near the dryer, leave the house and call the gas utility from outside before calling a repair company. Source: PSE locations - service area (King County: electric and natural gas)
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
Washington's state plumber certification law defines plumbing as potable water, waste, medical gas and similar systems and does not list fuel gas piping, so gas line work is not part of the state plumber certificate. Source: Chapter 18.106 RCW, Plumbers
Before You Book in Seattle
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Seattle, WA
What should I do about a Kenmore error code?
Which Seattle technicians work on Kenmore?
Should I repair or replace my Kenmore dryer?
Why do my clothes come out damp?
Other Dryer Repair in Seattle
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.