A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Newcastle
40 repair companies serve Newcastle from within 30 miles. 1 list an address in Newcastle, and the rest are spread across Bellevue (18), Renton (11), and Issaquah (4). The farthest listed company is about 7 miles out. Troubleshooters Appliance Repair is the nearest, roughly 1.0 miles from Newcastle. No company within 30 miles of Newcastle names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 34 rated companies in range average 4.9 stars.
Companies are shown by relevance and distance from Newcastle. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| List dryer or washer & dryer work | 15 |
| Mention Kenmore | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Distance to the three closest (mi) | 1.0, 1.9, 2.5 |
| Open on Saturdays (per listing) | 35 |
Closest matches for Newcastle: Sears Appliance Repair (69.2 miles away, based in Chehalis, 4.4 stars from 134 reviews, lists Saturday hours); Expert Appliance Repair (5.2 miles away, based in Seattle, 5.0 stars from 1,139 reviews); Troubleshooters Appliance Repair (1.0 miles away, 4.9 stars from 136 reviews, lists Saturday hours); Eastside Appliance Repair (6.5 miles away, based in Bellevue, 4.9 stars from 234 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
How a Dryer Service Call Usually Goes in Newcastle
Keeping a Kenmore Dryer Running
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Newcastle
Most dryer calls in Newcastle come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Newcastle Technician
- Can you look at the washer on the same visit if it is acting up too?
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Newcastle, WA
How do I find a technician who knows Kenmore dryers?
Why is my dryer running but not heating?
Why do my clothes come out damp?
Related Repair Pages for Newcastle
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.