A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Lake Mills list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Lake Mills WI
Within 30 miles of Lake Mills there are 37 appliance repair companies in our data. Other nearby bases include Madison (15), Janesville (4), and Sun Prairie (3). Of those, 1 mentions Kenmore by name. The closest is Sears Appliance Repair, about 10.9 miles away. Rated companies nearby average 4.4 stars across 36 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 15 |
|---|---|
| Mention Kenmore | 1 |
| Three nearest companies, miles away | 10.9, 10.9, 15.3 |
| Repair companies inside 30 miles | 37 |
| With 4.5+ stars and at least 10 reviews | 12 |
| Show laundry appliance work | 10 |
Closest matches for Lake Mills: Sears Appliance Repair (27.8 miles away, based in Beaver Dam, 4.5 stars from 86 reviews, lists Saturday hours); Sears Appliance Repair (25.6 miles away, based in Janesville, 4.4 stars from 232 reviews, lists Saturday hours); Sears Appliance Repair (10.9 miles away, based in Watertown, 4.1 stars from 55 reviews, lists Saturday hours); Stoughton Appliance Repair (20.8 miles away, based in Stoughton, 5.0 stars from 63 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
How Kenmore Dryers Are Built
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Kenmore Dryer Symptoms and First Checks
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Keeping a Kenmore Dryer Running
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Lake Mills
Most dryer calls in Lake Mills come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Hiring a Dryer Repair Company in Lake Mills
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Lake Mills, WI
What should I do about a Kenmore error code?
Why do my clothes come out damp?
Do you work for Kenmore?
More Laundry Repair in Lake Mills, WI
Kenmore Dryer Repair Near Lake Mills
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.