If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Little Chute, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Little Chute WI
Our data shows 30 appliance repair companies inside a 30-mile radius of Little Chute. Other nearby bases include Green Bay (12), Appleton (7), and Oshkosh (4). The farthest listed company is about 23 miles out. The closest is All Brands Appliance.., about 2.7 miles away. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 28 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 5 |
|---|---|
| Show laundry appliance work | 6 |
| Repair companies inside 30 miles | 30 |
| Distance to the three closest (mi) | 2.7, 3.5, 5.1 |
| Mention Kenmore | 0 |
| Listing Saturday hours | 11 |
At the top of the Little Chute list: Sears Appliance Repair (61.6 miles away, based in Beaver Dam, 4.5 stars from 86 reviews, lists Saturday hours); Mr. Appliance of Green Bay (16.3 miles away, based in De Pere, 4.8 stars from 428 reviews, lists Saturday hours); Sears Appliance Repair (7.9 miles away, based in Appleton, 4.2 stars from 70 reviews, lists Saturday hours); Mr. Appliance of Oshkosh (23.5 miles away, based in Oshkosh, 4.9 stars from 157 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Drum turns but the air stays cool
- Drum will not turn even though you hear a hum
What Gets Fixed on a Little Chute Dryer Call
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Little Chute
Most dryer calls in Little Chute come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Questions to Ask a Little Chute Technician
- Do you work on gas dryers, and who handles anything involving the gas line?
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Little Chute, WI
How do I find a technician who knows Kenmore dryers?
Is my Kenmore dryer worth repairing?
What should I do about a Kenmore error code?
What makes a dryer stop heating?
More Laundry Repair in Little Chute, WI
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.