Most Samsung dryer repairs in Port Townsend involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Port Townsend, with those that mention Samsung first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Samsung. If your dryer is still under manufacturer coverage, contact Samsung directly.
Samsung Dryer Repair Near Port Townsend
26 repair companies serve Port Townsend from within 30 miles. Other nearby bases include Everett (10), Edmonds (3), and Lynnwood (3). Distances run up to about 30 miles. The closest is Whidbey Appliance Service, about 10.4 miles away. No company within 90 miles of Port Townsend mentions Samsung by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 21 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Show laundry appliance work | 6 |
|---|---|
| Listing Saturday hours | 18 |
| Mention Samsung | 0 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Distance to the three closest (mi) | 10.4, 15.4, 17.8 |
| Repair companies inside 30 miles | 26 |
First up for Port Townsend: Sears Appliance Repair (17.8 miles away, based in Sequim, 4.7 stars from 220 reviews, lists Saturday hours); Ace Appliance Service (29.9 miles away, based in Everett, 5.0 stars from 322 reviews); Bill's City Appliance Repair (26.6 miles away, based in Poulsbo, 4.3 stars from 52 reviews); Fast Appliances Repair (28.6 miles away, based in Edmonds, 4.9 stars from 116 reviews, lists Saturday hours).
Samsung Dryer Lines and Features
What a Samsung Dryer Technician Deals With
Many Samsung dryers have a built-in vent blockage test started from the control panel that reports a clog code (such as CLg or C80) when exhaust airflow is restricted. Source: Samsung US - Clothes are not dry after using Samsung dryer
What Samsung Says to Check First
- Dryer takes too long to dry. Clean the lint filter, turn off Eco Dry, run the vent blockage test and confirm the vent meets the manual's length and material requirements. Source: Samsung US - Clothes are not dry after using Samsung dryer
- Noisy dryer. Identify whether the sound is rattling, thumping, squealing or humming, and for rattling start by leveling the feet. Source: Samsung US - Samsung dryer is too noisy
Reading a Samsung Dryer Error Code
| Code | What it means |
|---|---|
| tS / tC / tO / tE | Temperature sensor issue; the first step is cleaning the lint screen and exhaust vent. Source: Samsung US - Samsung dryer displays an error code |
| bE / 6E | A control panel button is stuck or reads as constantly pressed. Source: Samsung US - Samsung dryer displays an error code |
| dC / dE / dF | Door, latch or door sensor problem. Source: Samsung US - Samsung dryer displays an error code |
Full list: Samsung Dryer Error Codes Explained.
When to Call for Samsung Dryer Repair
- Drum turns but the air stays cool
- Drum will not turn even though you hear a hum
- Dryer shuts off a few minutes into the cycle
What Gets Fixed on a Port Townsend Dryer Call
Owner Care for Samsung Dryers
- Keep the exhaust vent sealed, unkinked and made of proper material rather than plastic or foil, and within the maximum length in the manual, remembering that each 90-degree turn cuts the allowed length by 6 feet. Source: Samsung US - Clothes are not dry after using Samsung dryer
- Wipe the moisture-sensor bars with a soft cloth and a small amount of dish soap to remove dryer-sheet residue. Source: Samsung US - Clothes are not dry after using Samsung dryer
Brand guides: Samsung Dryer Not Heating: Causes and Fixes, Samsung Dryer Not Drying: What to Check, Samsung Dryer Error Codes Explained.
What Samsung Dryer Repairs Cost
Price the repair before replacing a Samsung dryer. Published ranges for common jobs:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Any error code on the display
- Whether the dryer is gas or electric
Dryer Notes for Port Townsend, WA
Most dryer calls in Port Townsend come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Port Townsend Technician
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair Samsung dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
Samsung Dryer Repair FAQs: Port Townsend, WA
Which Port Townsend technicians work on Samsung?
Why is my dryer running but not heating?
Should I repair or replace my Samsung dryer?
Other Dryer Repair in Port Townsend
More Samsung Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Samsung dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.