Serving Columbia Falls, Montana and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Washer & Dryer Repair in Columbia Falls, MT

See which companies around Columbia Falls list washer and dryer repair, how far away they are and how customers rate them.

Washer or dryer down in Columbia Falls?
Call our helpline to be connected with a local technician who repairs both machines.
☎(888) 772-9805
✓6 companies listed for Columbia Falls✓Independent, not a manufacturer✓Public ratings & distances

A laundry room has two very different machines: a washer full of water, pumps and seals, and a dryer built around heat and airflow. The companies below serve Columbia Falls and the Flathead County area, with those that list washer and dryer repair shown first.

Laundry Appliance Technicians Serving Columbia Falls, MT

6 repair companies serve Columbia Falls from within 60 miles. Other nearby bases include Kalispell (5) and Polson (1). Distances run up to about 47 miles. Montana Affordable Services, LLC. is the nearest, roughly 11.6 miles from Columbia Falls. Of those, 2 mention washer and dryer repair by name. Rated companies nearby average 4.2 stars across 5 businesses. Columbia Falls is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Montana Affordable Services, LLC.
87 Winchester St, Kalispell, MT 59901
11.6 mi from Columbia Falls
★★★★★ 5.0 (371 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
214 1st St E, Polson, MT 59860
46.8 mi from Columbia Falls
DryersWashersSaturday hours
Appliance Repair
Alg Service And Repair
19 Dale Dr, Kalispell, MT 59901
16.5 mi from Columbia Falls
★★★★ 3.9 (7 reviews)
Saturday hours
Appliance Repair
Bud Blocks Service & Appliances inc.
9 S Meridian Rd, Kalispell, MT 59901
13.7 mi from Columbia Falls
★★★★½ 4.5 (116 reviews)
Appliance Repair
Sweet Tea Smarts Appliance Repair & Rentals
331 Harrison Blvd, Kalispell, MT 59901
11.9 mi from Columbia Falls
★★★½ 3.7 (3 reviews)
Saturday hours
Appliance Repair
Cates Appliance Sales & Repair
1011 E Idaho St, Kalispell, MT 59901
12.3 mi from Columbia Falls
★★★★ 4.0 (42 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Columbia Falls
Three nearest companies, miles away11.6, 11.9, 12.3
Open on Saturdays (per listing)5
Rated 4.5 stars or higher (10+ reviews)2
Show laundry appliance work2
Mention washers2
Appliance repair companies in range (60 mi)6

Closest matches for Columbia Falls: Montana Affordable Services, LLC. (11.6 miles away, based in Kalispell, 5.0 stars from 371 reviews, lists Saturday hours); Sears Appliance Repair (46.8 miles away, based in Polson, lists Saturday hours); Alg Service And Repair (16.5 miles away, based in Kalispell, 3.9 stars from 7 reviews, lists Saturday hours); Bud Blocks Service & Appliances inc. (13.7 miles away, based in Kalispell, 4.5 stars from 116 reviews).

⚡ One call to reach a local laundry appliance tech
☎(888) 772-9805

Washer Problems Worth a Call

  • Musty smell from a front-loader
  • Water left in the drum after the cycle
  • Leaks under or behind the washer

When the Dryer Needs a Technician

  • Dryer shuts off a few minutes into the cycle
  • Drum turns but the air stays cool
  • Outside of the cabinet gets unusually hot

What a Washer Repair Involves

Bearings and tubA loud rumble or roar that rises with spin speed usually means drum bearings. It is the biggest washer repair, and a technician will talk through cost against replacement before starting it.
Controls and sensorsElectronic washers rely on water level sensors, door sensors and a main control board. Error codes help narrow the diagnosis before parts are ordered.
Motor, belt and couplerIf the washer fills and drains but will not agitate or spin, the drive motor, belt or motor coupler is tested. Some direct-drive washers have no belt at all.

And on the Dryer Side

Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.
Igniter, valve coils and flame sensorGas dryers light the burner with a glowing igniter, open the gas valve with a set of coils and confirm the flame with a sensor. When the igniter glows but the burner never lights, the valve coils are a frequent culprit.

Most visits cover one machine; mention both if both are acting up. More: dryer not drying and dryer not spinning.

Washer & Dryer Repair Cost Ranges

Washer and dryer repairs vary more than people expect: a dryer belt is a small job, washer bearings are a big one. Published ranges:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Have These Handy

  • The washer's brand and model number
  • Whether it is a top-loader or front-loader
  • Whether it is a stacked pair or a laundry center
  • Any error code on the display
  • Whether the dryer is gas or electric

Around Columbia Falls

Washer calls in Columbia Falls most often involve drain pumps and filters, lid or door locks, inlet valves and worn suspension parts.

Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits

In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.

Questions to Ask a Columbia Falls Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • Can you give a written estimate before ordering parts?
  • How often do you repair your brand dryers, and do you carry common parts on the truck?

Washer & Dryer Repair FAQs: Columbia Falls, MT

Why won't my washer drain?
A clogged pump filter, a kinked drain hose or a failed drain pump are the usual causes. Front-loaders often have a filter you can reach behind a small panel at the bottom front.
Why does my dryer take so long to dry?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.
Can a technician work on a stacked laundry pair?
Stacked pairs and one-piece laundry centers take more time to access, because the dryer may need to come off the washer or the unit pulled from a closet. Mention the setup when you book so the visit is planned correctly.
What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.

Related Repair Pages for Columbia Falls

More Washer & Dryer Repair Pages Nearby

Have both model numbers ready and describe what each machine does. Mention a stacked pair, since that changes how the Columbia Falls technician gets at the parts.

Get connected with a washer and dryer technician near Columbia Falls
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech