If your Amana dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Coon Rapids, with those that mention Amana first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Dryers Near Coon Rapids
40 repair companies serve Coon Rapids from within 30 miles. 1 list an address in Coon Rapids, and other nearby bases include Minneapolis (9), Blaine (5), and Plymouth (4). No company within 90 miles of Coon Rapids mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Hero, about 2.4 miles away. The 22 rated companies in range average 4.5 stars.
Companies are shown by relevance and distance from Coon Rapids. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Amana | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 19 |
| Three nearest companies, miles away | 2.4, 2.5, 3.2 |
| Repair companies inside 30 miles | 60 |
| Listing Saturday hours | 50 |
| List dryer or washer & dryer work | 12 |
First up for Coon Rapids: Anderson's Mechanical Services LLC (3.9 miles away, based in Blaine, 4.8 stars from 1,207 reviews, lists Saturday hours); Warners' Stellian Appliance Outlet (12.8 miles away, based in Minneapolis, 4.7 stars from 670 reviews, lists Saturday hours); Omega Force Appliance Repair (12.2 miles away, based in Rogers, 4.9 stars from 1,637 reviews, lists Saturday hours); Warners' Stellian Appliance (14.4 miles away, based in St Paul, 4.8 stars from 2,260 reviews, lists Saturday hours).
Amana Dryer Lines and Features
What Makes Amana Dryer Repairs Different
The dryer needs a room temperature above 45°F to dry properly, and closet installs need adequate ventilation. Source: Amana - Electronic Dryer Use and Care Guide
Automatic cycles rely on the load contacting the sensor strips in the drum, so an unlevel dryer or very small load can end the cycle early. Source: Amana - Electronic Dryer Use and Care Guide
Common Amana Dryer Problems
- Dryer not tumbling. Amana says to confirm the dryer has power, that Start was held for a few seconds with dry hands, and that the power cord is installed correctly. Source: Amana Product Help - Not Tumbling or Spinning - Dryer
- Load too hot. Amana recommends letting the Cool Down portion finish and using a lower temperature or an automatic dry cycle. Source: Amana - Electronic Dryer Use and Care Guide
Signs Your Amana Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Cycles take two or three runs to finish
- Dryer will not start when you press Start
What a Dryer Repair Technician Checks
Owner Care for Amana Dryers
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Repair Cost Ranges
A Amana dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
What Coon Rapids Owners Should Know
Most dryer calls in Coon Rapids come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
Questions to Ask a Coon Rapids Technician
- Can you give a written estimate before ordering parts?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
Amana Dryer Repair FAQs: Coon Rapids, MN
Which Coon Rapids technicians work on Amana?
Why is my dryer running but not heating?
Why does my dryer take so long to dry?
Other Dryer Repair in Coon Rapids
Amana Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.