Serving Mustang, Oklahoma and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Amana Dryer Repair in Mustang, OK

Independent repair companies near Mustang that work on Amana dryers, with companies that mention Amana listed first.

Need Amana dryer repair near Mustang?
Call our helpline to be connected with an independent technician who repairs Amana dryers.
☎(888) 772-9805
✓10 companies listed for Mustang✓Independent, not a manufacturer✓Public ratings & distances

If your Amana dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions Amana and fill in with nearby dryer repair companies so you always have options.

Washer and Dryer Repair is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana dryers and other brands.

Who Works on Amana Dryers Near Mustang

Our data shows 31 appliance repair companies inside a 30-mile radius of Mustang. The rest are spread across Oklahoma City (13), Norman (5), and Edmond (3). The farthest listed company is about 28 miles out. No company within 90 miles of Mustang mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Adam's Appliance Repair, Inc, about 6.9 miles away. The 29 rated companies in range average 4.3 stars.

Washer & Dryer Repair
Adam's Appliance Repair, Inc
7712 NW 3rd St Ste D, Oklahoma City, OK 73127
6.9 mi from Mustang
★★★★★ 4.9 (1,147 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
All Pro Appliance Repair Service
2236 NW 164th St Suite #2, Edmond, OK 73013
19.6 mi from Mustang
★★★★★ 4.9 (1,254 reviews)
DryersWashers
Washer & Dryer Repair
Mr. Appliance of Oklahoma City
230 W Wilshire Blvd Suite 4G, Oklahoma City, OK 73116
16.0 mi from Mustang
★★★★½ 4.7 (1,102 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
All Pro Appliance Repair Service Oklahoma City
317 NW 60th St Ste d, Oklahoma City, OK 73118
15.2 mi from Mustang
★★★★★ 4.9 (617 reviews)
DryersWashers
Washer & Dryer Repair
Mr. Appliance of Yukon, Stillwater, and Edmond
13100 Colony Pointe Blvd Ste 107, Piedmont, OK 73078
14.7 mi from Mustang
★★★★★ 4.9 (884 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
3201 W Main St, Norman, OK 73072
17.8 mi from Mustang
★★★★½ 4.5 (149 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Adam's Appliance Repair, Inc
3557 National Dr # C, Norman, OK 73069
16.9 mi from Mustang
★★★★★ 5.0 (462 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4400 S Western Ave, Oklahoma City, OK 73109
11.2 mi from Mustang
★★★★ 4.2 (323 reviews)
DryersWashersSaturday hours
Appliance Repair
AlphaTek Appliance Repair
3030 Northwest Expy Ste 200 #534, Oklahoma City, OK 73112
12.8 mi from Mustang
★★★★★ 4.9 (1,440 reviews)
Saturday hours
Washer & Dryer Repair
Bob's Appliance Service
815 36th Ave NE, Norman, OK 73026
22.2 mi from Mustang
★★★★½ 4.3 (45 reviews)
DryersWashers

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Mustang
Listing Saturday hours18
Companies within 30 miles31
Rated 4.5 stars or higher (10+ reviews)15
Mention Amana0
List dryer or washer & dryer work11
Three nearest companies, miles away6.9, 7.8, 9.2

At the top of the Mustang list: Adam's Appliance Repair, Inc (6.9 miles away, based in Oklahoma City, 4.9 stars from 1,147 reviews, lists Saturday hours); All Pro Appliance Repair Service (19.6 miles away, based in Edmond, 4.9 stars from 1,254 reviews); Mr. Appliance of Oklahoma City (16.0 miles away, based in Oklahoma City, 4.7 stars from 1,102 reviews, lists Saturday hours); All Pro Appliance Repair Service Oklahoma City (15.2 miles away, based in Oklahoma City, 4.9 stars from 617 reviews).

⚡ Get connected with a Amana dryer technician near Mustang
☎(888) 772-9805

Amana Dryer Features Technicians Work On

7.4 cu. ft. front load matching dryers (NED5800HW / NGD5800HW)Amana's touch-control electric and gas dryers that pair with its front load washers and can be stacked.
Automatic Dryness ControlA sensing feature that ends the cycle when the load reaches the selected dryness to cut down on over-drying.

What Makes Amana Dryer Repairs Different

Amana calls for a rigid 4-inch metal exhaust vent kept as short as possible with no more than four 90-degree elbows, and says plastic or foil vent should be replaced. Source: Amana - Electronic Dryer Use and Care Guide

The dryer needs a room temperature above 45°F to dry properly, and closet installs need adequate ventilation. Source: Amana - Electronic Dryer Use and Care Guide

Amana Dryer Symptoms and First Checks

  • Cycle ends too soon. Amana says the load may not be touching the sensor strips, so level the dryer and use Timed Dry or a different dryness level for very small loads. Source: Amana - Electronic Dryer Use and Care Guide
  • Dryer making noise. Amana says a thump after sitting unused usually fades, then to check the drum edges for coins or buttons and make sure all four legs are installed and the dryer is level. Source: Amana - Electronic Dryer Use and Care Guide

Amana Dryer Problems Worth a Service Call

  • Cycles take two or three runs to finish
  • Clothes still damp after a full cycle
  • Outside of the cabinet gets unusually hot

What a Dryer Repair Technician Checks

Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.
Gas supply and shutoffA gas dryer needs an open shutoff valve and a sound flexible connector. Technicians check the supply before the burner assembly, and leave connector replacement or line work to whoever your state allows to do gas work.

Care Amana Recommends for Its Dryers

What Amana Dryer Repairs Cost

A Amana dryer repair usually costs about the same as any other brand for the same part. Published ranges:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Before the Technician Arrives

  • What happens when you press Start (no response, hum, runs with no heat, stops early)
  • How long the vent run is and where it exits the house
  • The brand, model and serial number from the label inside the door or on the back panel

What Mustang Owners Should Know

Most dryer calls in Mustang come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)

Natural gas piping work requires a Natural Gas Piping mechanical license or a plumbing license issued by the Oklahoma Construction Industries Board. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)

Questions to Ask a Mustang Technician

  • Do you work on gas dryers, and who handles anything involving the gas line?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Can you look at the washer on the same visit if it is acting up too?

Amana Dryer Repair FAQs: Mustang, OK

Why does my Amana dryer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.
Is this Amana customer service?
No. We are an independent directory and are not affiliated with Amana. The companies listed are independent technicians. For manufacturer coverage questions, contact Amana directly.
Is my Amana dryer worth repairing?
Compare the repair quote with the price of a comparable new dryer and consider its age. Belts, rollers, fuses and heating parts are modest repairs on a dryer that is otherwise sound. Our repair-cost guide shows published ranges.
Why is my dryer running but not heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.

Related Repair Pages for Mustang

Amana Dryer Repair in Nearby Cities

Amana Dryer Repair for Towns Near Mustang

The technicians listed for Mustang also cover smaller towns nearby, including Tuttle. If you are in one of them, the companies above are your closest Amana dryer repair options, and our helpline covers you too.

Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.

One call to a Amana dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech