A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Mustang
Our data shows 31 appliance repair companies inside a 30-mile radius of Mustang. Other nearby bases include Oklahoma City (13), Norman (5), and Edmond (3). None of the repair companies near Mustang name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Adam's Appliance Repair, Inc, about 6.9 miles away. The 29 rated companies in range average 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 31 |
|---|---|
| Show laundry appliance work | 11 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Listing Saturday hours | 18 |
| Three nearest companies, miles away | 6.9, 7.8, 9.2 |
| Mention Kenmore | 0 |
First up for Mustang: Mr. Appliance of Yukon, Stillwater, and Edmond (14.7 miles away, based in Piedmont, 4.9 stars from 884 reviews, lists Saturday hours); All Pro Appliance Repair Service (19.6 miles away, based in Edmond, 4.9 stars from 1,254 reviews); Adam's Appliance Repair, Inc (6.9 miles away, based in Oklahoma City, 4.9 stars from 1,147 reviews, lists Saturday hours); All Pro Appliance Repair Service Oklahoma City (15.2 miles away, based in Oklahoma City, 4.9 stars from 617 reviews).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Squealing, thumping or grinding while it runs
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Mustang, OK
Most dryer calls in Mustang come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
How to Choose a Dryer Technician Near Mustang
- Can you give a written estimate before ordering parts?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Mustang, OK
What makes a dryer stop heating?
What should I do about a Kenmore error code?
Should I repair or replace my Kenmore dryer?
Why does my dryer take so long to dry?
Related Repair Pages for Mustang
Kenmore Dryer Repair in Nearby Cities
Write down any error code your Kenmore dryer shows and when it appears. It helps a Mustang technician bring the right parts.