A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Tigard, with those that mention Amana first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Dryers Near Tigard
40 repair companies serve Tigard from within 30 miles. 6 of them are based in Tigard itself, and other nearby bases include Beaverton (10), Portland (8), and Lake Oswego (5). None of the repair companies near Tigard name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Portland Goockle Appliance Repair Solutions is the nearest, roughly 0.6 miles from Tigard. Across 25 rated companies, the average public rating is 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 14 |
|---|---|
| Show laundry appliance work | 9 |
| Mention Amana | 0 |
| Three nearest companies, miles away | 0.6, 1.0, 1.4 |
| Repair companies inside 30 miles | 60 |
| Listing Saturday hours | 41 |
Closest matches for Tigard: Mr. Appliance of Portland (1.8 miles away, based in Portland, 4.8 stars from 691 reviews, lists Saturday hours); A&P Appliance Parts and Service (4.5 miles away, based in Beaverton, 4.7 stars from 257 reviews, lists Saturday hours); Fix All Appliance Repair (7.5 miles away, based in Portland, 4.8 stars from 46 reviews); Hydra Appliance Repair (5.8 miles away, based in Portland, 4.7 stars from 231 reviews, lists Saturday hours).
Amana Dryer Features Technicians Work On
How Amana Dryers Are Built
The dryer needs a room temperature above 45°F to dry properly, and closet installs need adequate ventilation. Source: Amana - Electronic Dryer Use and Care Guide
Common Amana Dryer Problems
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
- Load too hot. Amana recommends letting the Cool Down portion finish and using a lower temperature or an automatic dry cycle. Source: Amana - Electronic Dryer Use and Care Guide
When to Call for Amana Dryer Repair
- Dryer will not start when you press Start
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Keeping a Amana Dryer Running
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Repair Cost Ranges
Most Amana dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Around Tigard
Most dryer calls in Tigard come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
Businesses that install, alter or repair LP gas appliances, piping or vent connections need an LP gas installation license, and the individuals doing the work need a fitter license, both from the Oregon State Fire Marshal; natural gas licensing was not confirmed. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
Questions to Ask a Tigard Technician
- How often do you repair Amana dryers, and do you carry common parts on the truck?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Amana Dryer Repair FAQs: Tigard, OR
Which Tigard technicians work on Amana?
Is my Amana dryer worth repairing?
What makes a dryer stop heating?
Why does my dryer take so long to dry?
Related Repair Pages for Tigard
Amana Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.