Most Amana dryer repairs in Taylors involve the same few systems: heat, airflow, the drum drive and the controls. The Taylors list starts with companies that name Amana, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Amana. If your dryer is still under manufacturer coverage, contact Amana directly.
Who Works on Amana Dryers Near Taylors
We found 34 appliance repair companies within 30 miles of Taylors. 1 list an address in Taylors, and the rest are spread across Greenville (11), Spartanburg (5), and Greer (2). Distances run up to about 29 miles. Nearest on the list: Appliance Medic, around 0.7 miles out. None of the repair companies near Taylors name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.4 stars across 34 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 10 |
|---|---|
| Repair companies inside 30 miles | 34 |
| Open on Saturdays (per listing) | 18 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Mention Amana | 0 |
| Distance to the three closest (mi) | 0.7, 4.7, 4.7 |
At the top of the Taylors list: Sholom Appliance Service & Repair LLC (10.4 miles away, based in Duncan, 5.0 stars from 200 reviews); Mr. Appliance of Greater Greenville (6.7 miles away, based in Greenville, 4.8 stars from 1,221 reviews); The Olde Homestead, Inc. (7.1 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Appliance GrandMasters (9.8 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours).
Know Your Amana Dryer
What Makes Amana Dryer Repairs Different
Front load matching models are stackable and use electronic touch controls, while top load matching models use dial controls. Source: Amana - Dryer Comparison Chart
Common Amana Dryer Problems
- Dryer not tumbling. Amana says to confirm the dryer has power, that Start was held for a few seconds with dry hands, and that the power cord is installed correctly. Source: Amana Product Help - Not Tumbling or Spinning - Dryer
- Clothes take too long to dry. Amana points to a dirty lint screen, overloading, a No Heat setting, or a vent that is clogged, crushed, kinked, too long or has too many turns. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Problems Worth a Service Call
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
- Dryer shuts off a few minutes into the cycle
Inside a Dryer Repair Visit
Owner Care for Amana Dryers
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Repair Cost Ranges
Price the repair before replacing a Amana dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Around Taylors
Most dryer calls in Taylors come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
South Carolina has no standalone gas piping license; gas lines serving gas-fired equipment are installed under mechanical classifications such as Plumbing, Heating and Packaged Equipment issued through the Department of Labor, Licensing and Regulation. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
How to Choose a Dryer Technician Near Taylors
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
Amana Dryer Repair FAQs: Taylors, SC
Which Taylors technicians work on Amana?
Why do my clothes come out damp?
Why is my dryer running but not heating?
Other Dryer Repair in Taylors
Amana Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.