Most Amana dryer repairs in Frisco involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Amana and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Dryer Technicians, Frisco TX
Within 30 miles of Frisco there are 40 appliance repair companies in our data. 14 list an address in Frisco, and the rest are spread across McKinney (8), Plano (6), and Little Elm (4). Nearest on the list: Viking & Sub-Zero Service, around 0.6 miles out. None of the repair companies near Frisco name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Across 34 rated companies, the average public rating is 4.8 stars.
Companies are shown by relevance and distance from Frisco. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Amana | 0 |
|---|---|
| Distance to the three closest (mi) | 0.6, 0.7, 1.1 |
| Rated 4.5 stars or higher (10+ reviews) | 29 |
| List dryer or washer & dryer work | 20 |
| Open on Saturdays (per listing) | 48 |
| Repair companies inside 30 miles | 60 |
First up for Frisco: Smartway Appliance Repair (7.7 miles away, based in McKinney, 4.9 stars from 1,145 reviews, lists Saturday hours); Sensor Appliance Repair (7.1 miles away, based in Plano, 5.0 stars from 324 reviews, lists Saturday hours); START Appliance repair (9.2 miles away, based in Plano, 4.9 stars from 44 reviews, lists Saturday hours); ThumbUp Pro Appliance Repair (6.5 miles away, based in McKinney, 4.9 stars from 247 reviews, lists Saturday hours).
Know Your Amana Dryer
How Amana Dryers Are Built
Front load matching models are stackable and use electronic touch controls, while top load matching models use dial controls. Source: Amana - Dryer Comparison Chart
Common Amana Dryer Problems
- Dryer won't start. Amana says to press and hold Start for two to five seconds first, then check the fuses or breakers, the door latch, the cycle selection and whether the controls are locked. Source: Amana Product Help - Dryer Not Starting or No Operation
- Dryer not tumbling. Amana says to confirm the dryer has power, that Start was held for a few seconds with dry hands, and that the power cord is installed correctly. Source: Amana Product Help - Not Tumbling or Spinning - Dryer
Amana Dryer Problems Worth a Service Call
- Drum turns but the air stays cool
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Care Amana Recommends for Its Dryers
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Dryer Repairs Cost
Most Amana dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Around Frisco
Most dryer calls in Frisco come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Frisco Technician
- How often do you repair Amana dryers, and do you carry common parts on the truck?
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
Amana Dryer Repair FAQs: Frisco, TX
What makes a dryer stop heating?
Which Frisco technicians work on Amana?
Why does my Amana dryer show an error code?
Should I repair or replace my Amana dryer?
Other Dryer Repair in Frisco
More Amana Dryer Repair Pages Nearby
Write down any error code your Amana dryer shows and when it appears. It helps a Frisco technician bring the right parts.