A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Amana and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Amana Dryer Repair Near Heber
Our data shows 40 appliance repair companies inside a 30-mile radius of Heber. The rest are spread across Orem (9), Provo (6), and Sandy (6). Heber Park City Appliance is the nearest, roughly 0.9 miles from Heber. No company within 90 miles of Heber mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 29 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.9, 1.2, 10.9 |
|---|---|
| List dryer or washer & dryer work | 6 |
| Open on Saturdays (per listing) | 42 |
| Appliance repair companies in range (30 mi) | 60 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Mention Amana | 0 |
At the top of the Heber list: Brothers Masters (19.4 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Heber Park City Appliance (0.9 miles away, based in Heber City, 4.6 stars from 534 reviews, lists Saturday hours); Refrigerate (21.4 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours); Heber Park City Appliance Sales. (10.9 miles away, based in Park City, 5.0 stars from 1 reviews, lists Saturday hours).
Know Your Amana Dryer
How Amana Dryers Are Built
Amana calls for a rigid 4-inch metal exhaust vent kept as short as possible with no more than four 90-degree elbows, and says plastic or foil vent should be replaced. Source: Amana - Electronic Dryer Use and Care Guide
Common Amana Dryer Problems
- Dryer won't start. Amana says to press and hold Start for two to five seconds first, then check the fuses or breakers, the door latch, the cycle selection and whether the controls are locked. Source: Amana Product Help - Dryer Not Starting or No Operation
- Load too hot. Amana recommends letting the Cool Down portion finish and using a lower temperature or an automatic dry cycle. Source: Amana - Electronic Dryer Use and Care Guide
When to Call for Amana Dryer Repair
- Burning or hot smell during a cycle
- Outside of the cabinet gets unusually hot
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Owner Care for Amana Dryers
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
- Have a qualified technician remove lint from inside the dryer cabinet every two years, or more often with heavy use. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Repair Cost Ranges
Most Amana dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Amana Dryer Call
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- Any error code on the display
Local Notes for Heber
Most dryer calls in Heber come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
Questions to Ask a Heber Technician
- What guarantee do you give on parts and labor?
- Can you look at the washer on the same visit if it is acting up too?
- Do you work on gas dryers, and who handles anything involving the gas line?
Amana Dryer Repair FAQs: Heber, UT
Why do my clothes come out damp?
Is my Amana dryer worth repairing?
Do you work for Amana?
How do I find a technician who knows Amana dryers?
Other Dryer Repair in Heber
Amana Dryer Repair in Nearby Cities
Nearby Towns Served From Heber
Amana dryer repair for Midway is handled by the same companies listed for Heber. Each town also has its own dryer repair page with the nearest companies:
Before you call, find the model and serial number on your Amana dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.