Most dryer breakdowns come down to a short list of parts: the heat source, the safety fuses, the belt and rollers, and the airflow path to the outside. This page lists independent appliance repair companies serving Hermantown and the St. Louis County area, with companies that list dryer or washer-and-dryer work shown first.
Who Repairs Dryers Near Hermantown
Our data shows 10 appliance repair companies inside a 60-mile radius of Hermantown. Other nearby bases include Duluth (3), Superior (2), and Esko (1). Distances run up to about 53 miles. Sears Appliance Repair is the nearest, roughly 3.9 miles from Hermantown. 1 of them mentions dryer or washer-and-dryer work in their listing or website. Rated companies nearby average 4.3 stars across 7 businesses. Hermantown is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 60 miles | 10 |
|---|---|
| List dryer or washer & dryer work | 1 |
| Three nearest companies, miles away | 3.9, 5.9, 6.6 |
| Mention a major dryer brand | 0 |
| Listing Saturday hours | 3 |
| Rated 4.5 stars or higher (10+ reviews) | 1 |
The leading options for Hermantown are Sears Appliance Repair (3.9 miles away, based in Duluth, 4.1 stars from 72 reviews, lists Saturday hours); Better Service Duluth Inc (6.6 miles away, based in Esko, 4.9 stars from 55 reviews); Johnson Appliance Service (8.9 miles away, based in Superior, 1.9 stars from 84 reviews, lists Saturday hours); Jordan Repair Service (5.9 miles away, based in Duluth).
When to Call for Dryer Repair
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
- Burning or hot smell during a cycle
- Dryer shuts off a few minutes into the cycle
Why Dryers Break Down
What a Dryer Repair Technician Checks
Lint, Vents and Dryer Fires
Clothes that are still damp after a normal cycle, longer-than-usual drying times, or little exhaust air coming out of the outside vent while the dryer runs can all point to a blocked lint screen or exhaust duct. Source: U.S. Consumer Product Safety Commission - Overheated Clothes Dryers Can Cause Fires
Under the model residential code approach, a 4-inch dryer exhaust duct is limited to 35 feet of equivalent length, minus 2.5 feet for each 45-degree bend and 5 feet for each 90-degree bend, unless the dryer manufacturer's installation instructions set a different maximum. Source: U.S. DOE Building America Solution Center (PNNL) - Proper Clothes Dryer Venting
More: clogged dryer vent warning signs.
What Dryer Repair Costs in Hermantown
Most dryer repairs involve a modest part and an hour or so of labor. Reference ranges from published cost guides:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Dryer Notes for Hermantown, MN
Most dryer calls in Hermantown come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
Hiring a Dryer Repair Company in Hermantown
- Can you give a written estimate before ordering parts?
- How often do you repair your brand dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
Dryer Repair FAQs: Hermantown, MN
Why do my clothes come out damp?
Can the same technician fix a gas dryer?
Should I repair or replace my dryer?
Why is my dryer running but not heating?
Dryer Repair by Brand in Hermantown
Dryer Repair in Nearby Cities
A clear vent, a clean lint screen and the model number in hand make any dryer repair in Hermantown faster and cheaper.