Serving Redmond, Oregon and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Dryer Repair in Redmond, OR

Gas and electric dryer repair from independent technicians serving Redmond, with ratings, distances and what to check before you call.

Talk to a dryer repair tech near Redmond
Call our helpline to be connected with an independent dryer technician near you.
☎(888) 772-9805
✓12 companies listed for Redmond✓Independent, not a manufacturer✓Public ratings & distances

When a dryer quits in Redmond, the first question is whether it is the machine or the vent, and the answer decides whether you need a repair at all. Below are the companies within reach of Redmond, sorted by how closely they match dryer work, then by distance and public ratings.

Local Dryer Repair in Redmond, OR

13 repair companies serve Redmond from within 30 miles. 2 of them are based in Redmond itself, and other nearby bases include Bend (8), Prineville (2), and Madras (1). Nearest on the list: Sears Appliance Repair, around 0.9 miles out. 7 list dryer or washer-and-dryer work specifically. Rated companies nearby average 4.3 stars across 11 businesses.

Washer & Dryer Repair
Polished Appliance Repair - Serving Central Oregon, Medford, and Eugene
1480 NE Jackpine Ave Ste 106, Redmond, OR 97756
2.1 mi from Redmond
★★★★½ 4.5 (261 reviews)
DryersWashers
Washer & Dryer Repair
CORTech Services LLC.
740 SE 9th St Unit 4, Bend, OR 97702
16.2 mi from Redmond
★★★★½ 4.6 (297 reviews)
DryersWashers
Washer & Dryer Repair
Oregon Appliance Repair
1133 NW Wall St ES-5, Bend, OR 97703
15.4 mi from Redmond
★★★★ 3.9 (369 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
224 SW 6th St, Redmond, OR 97756
0.9 mi from Redmond
★★★★ 4.2 (6 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1515 NE 3rd St B, Prineville, OR 97754
17.5 mi from Redmond
★★★★½ 4.5 (2 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
510 SW 5th St Suite B, Madras, OR 97741
25.4 mi from Redmond
Mentions Samsung, LG, WhirlpoolDryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
61303 S Hwy 97, Bend, OR 97702
17.7 mi from Redmond
★★★½ 3.5 (17 reviews)
DryersWashersSaturday hours
Appliance Repair
Appliance Hospital
62691 Hawkview Road, Bend, OR 97701
13.4 mi from Redmond
★★★★★ 4.8 (57 reviews)
Appliance Repair
Crystal Appliance Repair
2660 NE Hwy 20 Ste 610 #510, Bend, OR 97701
14.9 mi from Redmond
★★★★★ 5.0 (77 reviews)
Saturday hours
Appliance Repair
Mitchell's Appliance Repair Experts
841 NW Bond St, Bend, OR 97703
15.6 mi from Redmond
★★★★ 4.2 (10 reviews)
Appliance Repair
Polished Appliance Repair
Bend, OR 97701
11.1 mi from Redmond
★★★★½ 4.3 (6 reviews)
Appliance Repair
Pinewood Appliance Repair
833 SE 2nd St, Bend, OR 97702
16.5 mi from Redmond
★★★★ 4.2 (29 reviews)

Companies are shown by relevance and distance from Redmond. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Dryer repair near Redmond at a glance
Rated 4.5 stars or higher (10+ reviews)4
List dryer or washer & dryer work7
Mention a major dryer brand1
Listing Saturday hours7
Distance to the three closest (mi)0.9, 2.1, 11.1
Companies within 30 miles13

Closest matches for Redmond: Polished Appliance Repair - Serving Central Oregon, Medford, and Eugene (2.1 miles away, 4.5 stars from 261 reviews); CORTech Services LLC. (16.2 miles away, based in Bend, 4.6 stars from 297 reviews); Oregon Appliance Repair (15.4 miles away, based in Bend, 3.9 stars from 369 reviews, lists Saturday hours); Sears Appliance Repair (0.9 miles away, 4.2 stars from 6 reviews, lists Saturday hours).

⚡ Get connected with a dryer technician near Redmond
☎(888) 772-9805

Dryer Problems Worth a Service Call

  • Clothes still damp after a full cycle
  • Burning or hot smell during a cycle
  • Dryer will not start when you press Start
  • Cycles take two or three runs to finish

The Usual Dryer Culprits in Redmond

Heat-source failuresElectric elements burn out and gas igniters and valve coils weaken with age. Either one leaves the drum turning with no heat.
Worn drum partsBelts, rollers and idler pulleys are wear items. They announce themselves with squeaks, thumps and eventually a drum that will not turn.
Sensor-dry problemsMoisture-sensing cycles rely on two metal strips in the drum. A film of fabric softener on them can make cycles stop too early.

Inside a Dryer Repair Visit

Heating elementElectric dryers heat with a coiled element. If the drum turns but the air stays cool, the element is checked for continuity along with the thermostats and fuses that feed it.
Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

Why the Vent Matters

Do not leave a dryer running when you leave the house or go to bed. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

Under the model residential code approach, a 4-inch dryer exhaust duct is limited to 35 feet of equivalent length, minus 2.5 feet for each 45-degree bend and 5 feet for each 90-degree bend, unless the dryer manufacturer's installation instructions set a different maximum. Source: U.S. DOE Building America Solution Center (PNNL) - Proper Clothes Dryer Venting

The outside termination should have a backdraft damper and no screen (screens trap lint), and the flap must open when the dryer runs and be kept clear of snow. Source: U.S. DOE Building America Solution Center (PNNL) - Proper Clothes Dryer Venting

More: clogged dryer vent warning signs.

Dryer Repair Cost Ranges

Dryer repairs are some of the least expensive appliance repairs, which is why most are worth pricing before you shop for a new one. Published ranges:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Dryer Notes for Redmond, OR

Most dryer calls in Redmond come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

Businesses that install, alter or repair LP gas appliances, piping or vent connections need an LP gas installation license, and the individuals doing the work need a fitter license, both from the Oregon State Fire Marshal; natural gas licensing was not confirmed. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

Before You Book in Redmond

  • If a part has to be ordered, how soon can you come back to finish?
  • Is your company licensed where my state requires it, and insured?
  • Can you give a written estimate before ordering parts?

Dryer Repair FAQs: Redmond, OR

Are you affiliated with any dryer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your dryer is still under manufacturer coverage, contact the brand first.
Why does my dryer take so long to dry?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.
Why is my dryer squealing?
Squeaks and squeals usually come from worn drum rollers, the idler pulley or the drum glides. They are not dangerous right away, but worn parts can damage the belt or drum if they are left too long.
Is there anything I can try first?
Confirm the breaker or gas is on, clean the lint screen, and make sure the vent hood outside opens when the dryer runs. If the vent is blocked or crushed, clear it before running the dryer again.

Find Your Dryer Brand in Redmond

Dryer Repair in Nearby Cities

Before you call a Redmond technician, check the breaker or gas shutoff, clean the lint screen and look at the vent hood outside. If the dryer still misbehaves, have the model number ready.

Tell us what your dryer is doing and we will connect you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech