Serving Anaconda, Montana and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Gas & Electric Dryer Repair in Anaconda, MT

Local repair companies near Anaconda, MT for gas dryers and electric dryers, with companies that mention gas appliance work listed first.

Gas dryer not heating in Anaconda?
Tell us whether it is gas or electric and we will connect you with a local technician.
☎(888) 772-9805
✓5 companies listed for Anaconda✓Independent, not a manufacturer✓Public ratings & distances

The fastest way to narrow down a dryer that will not heat is to know how it heats: a gas burner with an igniter and valve, or an electric element on a 240-volt circuit. Below are independent repair companies within reach of Anaconda, with those that list gas appliance or dryer work shown first.

Gas & Electric Dryer Repair Near Anaconda

We found 5 appliance repair companies within 60 miles of Anaconda. Other nearby bases include Butte (2), Hamilton (2), and Corvallis (1). Bowman Appliance Repair is the nearest, roughly 25.5 miles from Anaconda. Of those, 2 mention gas appliance or dryer work by name. Across 3 rated companies, the average public rating is 4.7 stars. Anaconda is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
3300 Harrison Ave, Butte, MT 59701
27.6 mi from Anaconda
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1235 N 1st St, Hamilton, MT 59840
54.0 mi from Anaconda
DryersWashersSaturday hours
Appliance Repair
Bowman Appliance Repair
208 W Park St, Butte, MT 59701
25.5 mi from Anaconda
★★★★½ 4.3 (62 reviews)
Appliance Repair
406 Appliance Repair
1718 Eastside Hwy, Corvallis, MT 59828
53.8 mi from Anaconda
★★★★★ 5.0 (143 reviews)
Appliance Repair
Johnson Appliance Service
142 Cyn Fls Wy, Hamilton, MT 59840
54.0 mi from Anaconda
★★★★½ 4.7 (81 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Anaconda
Open on Saturdays (per listing)3
Repair companies inside 60 miles5
Rated 4.5 stars or higher (10+ reviews)2
Three nearest companies, miles away25.5, 27.6, 53.8
Show laundry appliance work2
Mention gas appliance work0

At the top of the Anaconda list: Sears Appliance Repair (27.6 miles away, based in Butte, lists Saturday hours); Sears Appliance Repair (54.0 miles away, based in Hamilton, lists Saturday hours); Bowman Appliance Repair (25.5 miles away, based in Butte, 4.3 stars from 62 reviews); 406 Appliance Repair (53.8 miles away, based in Corvallis, 5.0 stars from 143 reviews).

⚡ Tell us the fuel type and the symptom and we will connect you
☎(888) 772-9805

How Gas and Electric Dryers Differ

How an electric dryer heatsAn electric dryer runs current through a coiled heating element, protected by a thermal fuse and cycling and high-limit thermostats. It needs both legs of a 240-volt circuit to heat.
How a gas dryer heatsA gas dryer lights a burner with a hot-surface igniter, opens the gas valve through a set of coils and uses a flame sensor to confirm ignition. When the sequence fails, the drum keeps turning but the air stays cool.

Angi notes electric dryers are easier to fix with simple parts like belts, switches and heaters, while gas dryer work calls for a gas appliance repair professional. Source: Angi - Gas vs. Electric Dryers

Gas Dryer Parts That Fail

Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.
Drive motorIf the dryer hums but the drum does not move, or it starts only after a push, the motor or its start circuit is tested. On many models the motor also turns the blower wheel, so airflow and tumbling fail together.

What a Technician Checks on an Electric Dryer

Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.

If You Smell Gas

A dryer exhaust system carries combustion gases including carbon monoxide out of the home, so HUD rates a detached, missing or blocked dryer exhaust as a life-threatening deficiency; a CO alarm in the laundry area is recommended with gas dryers. Source: U.S. HUD - NSPIRE Standard: Clothes Dryer Exhaust Ventilation

Never turn back on gas that was shut off for safety, and have gas line work done by a licensed plumber or the gas company. Source: Connecticut Public Utilities Regulatory Authority - What To Do If You Smell Natural Gas

More: gas dryer not heating and dryer not heating.

What Heat-Source Repairs Cost

Gas and electric dryers have different heat-source parts but similar labor. Published ranges for common repairs:

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Dryer Notes for Anaconda, MT

Most dryer calls in Anaconda come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits

In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.

Questions to Ask a Anaconda Technician

  • Do you work on gas dryers, and who handles anything involving the gas line?
  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?

Gas & Electric Dryer Repair FAQs: Anaconda, MT

Are you affiliated with any dryer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your dryer is still under manufacturer coverage, contact the brand first.
Which costs more to fix, gas or electric?
The common heat-source parts on both are modestly priced, and labor is similar. Gas dryers add ignition parts that electric models do not have. Our cost guide lists published ranges for both.
Is a gas smell from the dryer an emergency?
Yes. Do not operate switches or the dryer. Leave the house and call your gas utility or 911 from outside, and only call a repair company after the utility says it is safe.

Related Repair Pages for Anaconda

Gas & Electric Dryer Repair in Nearby Cities

Note whether your dryer is natural gas, propane or electric, and what happens when you press Start. That tells a Anaconda technician which parts to bring.

Get connected with a gas or electric dryer technician near Anaconda
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech