Samsung owners in Anaconda usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Anaconda, with those that mention Samsung first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Samsung. If your dryer is still under manufacturer coverage, contact Samsung directly.
Independent Samsung Dryer Technicians, Anaconda MT
Within 60 miles of Anaconda there are 5 appliance repair companies in our data. Other nearby bases include Butte (2), Hamilton (2), and Corvallis (1). Distances run up to about 54 miles. Nearest on the list: Bowman Appliance Repair, around 25.5 miles out. No company within 90 miles of Anaconda mentions Samsung by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 3 rated companies in range average 4.7 stars. Anaconda is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Samsung | 0 |
|---|---|
| Three nearest companies, miles away | 25.5, 27.6, 53.8 |
| List dryer or washer & dryer work | 2 |
| Appliance repair companies in range (60 mi) | 5 |
| Listing Saturday hours | 3 |
| Rated 4.5 stars or higher (10+ reviews) | 2 |
At the top of the Anaconda list: Sears Appliance Repair (27.6 miles away, based in Butte, lists Saturday hours); Bowman Appliance Repair (25.5 miles away, based in Butte, 4.3 stars from 62 reviews); 406 Appliance Repair (53.8 miles away, based in Corvallis, 5.0 stars from 143 reviews); Sears Appliance Repair (54.0 miles away, based in Hamilton, lists Saturday hours).
Know Your Samsung Dryer
How Samsung Dryers Are Built
Many Samsung dryers have a built-in vent blockage test started from the control panel that reports a clog code (such as CLg or C80) when exhaust airflow is restricted. Source: Samsung US - Clothes are not dry after using Samsung dryer
Sensor Dry cycles rely on two curved metal moisture-sensor bars inside the front of the drum near the lint filter housing, and fabric softener sheet residue on them can make cycles end with damp clothes. Source: Samsung US - Clothes are not dry after using Samsung dryer
Common Samsung Dryer Problems
- Cycle ends with clothes still damp. Clean the moisture sensors, pick a higher dry level and make sure the load is at least about four bath towels. Source: Samsung US - Clothes are not dry after using Samsung dryer
- Dryer not heating. Run Time Dry briefly to confirm there is no heat, then check the 240V outlet or gas supply, cycle the breaker, and run the vent blockage test. Source: Samsung US - Clothes are not dry after using Samsung dryer
What Samsung Dryer Codes Mean
| Code | What it means |
|---|---|
| CL | Child Lock is turned on. Source: Samsung US - Samsung dryer displays an error code |
| dn | A firmware download is in progress; do not unplug the dryer. Source: Samsung US - Samsung dryer displays an error code |
| 9C1 / 9E / 2E | Abnormal power supply voltage; make sure the dryer is on its own circuit without an extension cord. Source: Samsung US - Samsung dryer displays an error code |
Full list: Samsung Dryer Error Codes Explained.
When to Call for Samsung Dryer Repair
- Squealing, thumping or grinding while it runs
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Care Samsung Recommends for Its Dryers
- Clean the lint filter before or after every drying cycle. Source: Samsung US - Clothes are not dry after using Samsung dryer
- Level the dryer by adjusting the feet with a carpenter's level to reduce rattling and vibration. Source: Samsung US - Samsung dryer is too noisy
Brand guides: Samsung Dryer Not Heating: Causes and Fixes, Samsung Dryer Not Drying: What to Check, Samsung Dryer Error Codes Explained.
Samsung Dryer Repair Cost Ranges
A Samsung dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Samsung Dryer Call
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Anaconda
Most dryer calls in Anaconda come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits
In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.
How to Choose a Dryer Technician Near Anaconda
- How often do you repair Samsung dryers, and do you carry common parts on the truck?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the vent and lint path as part of the visit?
Samsung Dryer Repair FAQs: Anaconda, MT
How do I find a technician who knows Samsung dryers?
Why is my dryer running but not heating?
Should I repair or replace my Samsung dryer?
More Laundry Repair in Anaconda, MT
Samsung Dryer Repair Near Anaconda
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Samsung repair.