Serving Billings, Montana and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Samsung Dryer Repair in Billings, MT

See which technicians around Billings, MT mention Samsung, how far away they are and how customers rate them.

Need Samsung dryer repair near Billings?
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 772-9805
✓10 companies listed for Billings✓Independent, not a manufacturer✓Public ratings & distances

Most Samsung dryer repairs in Billings involve the same few systems: heat, airflow, the drum drive and the controls. The Billings list starts with companies that name Samsung, followed by other appliance repair companies that list dryer work.

Washer and Dryer Repair is independent and not affiliated with Samsung. Listed companies are independent technicians who repair Samsung dryers and other brands.

Samsung Dryer Repair Near Billings

Our data shows 11 appliance repair companies inside a 60-mile radius of Billings. 11 list an address in Billings. The farthest listed company is about 5 miles out. No company within 90 miles of Billings mentions Samsung by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Sears Appliance Repair, about 0.3 miles away. Rated companies nearby average 4.2 stars across 11 businesses. Billings is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Big Sky Appliance Repair
1015 Arlington Ave SW, Billings, MT 59101
3.0 mi from Billings
★★★★★ 4.9 (105 reviews)
DryersWashers
Appliance Repair
Fred's Appliance
2649 King Ave W, Billings, MT 59102
2.6 mi from Billings
★★★★½ 4.4 (739 reviews)
DryersWashersSaturday hours
Appliance Repair
Waynes appliance repair corp
1425 St Johns Ave, Billings, MT 59102
1.2 mi from Billings
★★★★★ 5.0 (55 reviews)
Washer & Dryer Repair
Sears Appliance Repair
1515 Grand Ave, Billings, MT 59102
0.3 mi from Billings
★ 1.0 (3 reviews)
DryersWashersSaturday hours
Appliance Repair
Revive Appliance Repair
3969 Kings Green Dr, Billings, MT 59101
3.1 mi from Billings
★★★★★ 5.0 (75 reviews)
Appliance Repair
Good Stuff Appliance Repair
1008 Broadwater Ave, Billings, MT 59102
1.0 mi from Billings
★★★★ 3.9 (29 reviews)
Appliance Repair
Radio Equipment Co
1205 Monad Rd, Billings, MT 59101
1.9 mi from Billings
★★★★½ 4.4 (19 reviews)
Appliance Repair
Billings Appliance Repair Tech
3109 First Ave N, Billings, MT 59101
2.1 mi from Billings
★★★★★ 5.0 (1 review)
Appliance Repair
Brink Inc. Hobart Sales & Service
216 Moore Ln, Billings, MT 59101
1.7 mi from Billings
★★★★ 4.2 (13 reviews)
Appliance Repair
Appliance Repair Billings MT
520 Wicks Ln Unit 10, Billings, MT 59105
4.6 mi from Billings
★★★★★ 5.0 (2 reviews)
Saturday hours

Companies are shown by relevance and distance from Billings. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Repair market snapshot: Billings, MT
Listing Saturday hours4
List dryer or washer & dryer work3
Rated 4.5 stars or higher (10+ reviews)3
Mention Samsung0
Distance to the three closest (mi)0.3, 1.0, 1.2
Companies within 60 miles11

First up for Billings: Big Sky Appliance Repair (3.0 miles away, 4.9 stars from 105 reviews); Fred's Appliance (2.6 miles away, 4.4 stars from 739 reviews, lists Saturday hours); Waynes appliance repair corp (1.2 miles away, 5.0 stars from 55 reviews); Sears Appliance Repair (0.3 miles away, 1.0 stars from 3 reviews, lists Saturday hours).

⚡ Get connected with a Samsung dryer technician near Billings
☎(888) 772-9805

Samsung Dryer Features Technicians Work On

Smart CareA built-in diagnostic check that shows a code the Samsung app reads to suggest fixes.
Bespoke AI Laundry HubA full-size front-load washer and dryer stacked in one unit with a central control panel, offered with a gas or electric dryer.

How Samsung Dryers Are Built

The Eco Dry setting lowers heat to save energy and can switch on automatically for Normal or Time Dry cycles, which lengthens dry times and can be mistaken for a heating fault. Source: Samsung US - Clothes are not dry after using Samsung dryer

Samsung Dryer Symptoms and First Checks

What Samsung Dryer Codes Mean

CodeWhat it means
HC / hEDryer is overheating or the heater is not getting hot enough. Source: Samsung US - Samsung dryer displays an error code
FC / FEInvalid power frequency detected. Source: Samsung US - Samsung dryer displays an error code
bE / 6EA control panel button is stuck or reads as constantly pressed. Source: Samsung US - Samsung dryer displays an error code

Full list: Samsung Dryer Error Codes Explained.

Smart Care lets the owner press a button on the washer or dryer to display a diagnostic code that the Samsung app scans and turns into troubleshooting steps, while Wi-Fi models offer the same check inside the SmartThings app. Source: Samsung US - Use Smart Care on your Samsung washer and dryer

Signs Your Samsung Dryer Needs a Technician

  • Outside of the cabinet gets unusually hot
  • Dryer shuts off a few minutes into the cycle
  • Dryer will not start when you press Start

How a Dryer Service Call Usually Goes in Billings

Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.
Drive motorIf the dryer hums but the drum does not move, or it starts only after a push, the motor or its start circuit is tested. On many models the motor also turns the blower wheel, so airflow and tumbling fail together.

Owner Care for Samsung Dryers

Brand guides: Samsung Dryer Not Heating: Causes and Fixes, Samsung Dryer Not Drying: What to Check, Samsung Dryer Error Codes Explained.

Budgeting for a Samsung Dryer Repair

A Samsung dryer repair usually costs about the same as any other brand for the same part. Published ranges:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What to Have Ready for a Samsung Dryer Call

  • What happens when you press Start (no response, hum, runs with no heat, stops early)
  • Whether the dryer is gas or electric
  • Any error code on the display

What Billings Owners Should Know

Most dryer calls in Billings come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits

In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.

How to Choose a Dryer Technician Near Billings

  • Is your company licensed where my state requires it, and insured?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Will you check the vent and lint path as part of the visit?

Samsung Dryer Repair FAQs: Billings, MT

Why does my Samsung dryer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.
Should I repair or replace my Samsung dryer?
Compare the repair quote with the price of a comparable new dryer and consider its age. Belts, rollers, fuses and heating parts are modest repairs on a dryer that is otherwise sound. Our repair-cost guide shows published ranges.
What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Why does my dryer take so long to dry?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.

More Laundry Repair in Billings, MT

Samsung Dryer Repair Near Billings

Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Samsung repair.

One call to a Samsung dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech