Serving Sidney, Montana and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Gas & Electric Dryer Repair in Sidney, MT

Gas and electric dryers heat in different ways and fail in different ways. Here are the technicians serving Sidney who work on both.

Need gas or electric dryer repair near Sidney?
Call our helpline to be connected with a technician who repairs gas and electric dryers.
☎(888) 772-9805
✓6 companies listed for Sidney✓Independent, not a manufacturer✓Public ratings & distances

A gas dryer that tumbles but stays cold usually points to the ignition system, while an electric dryer with the same symptom points to the element, fuses or power supply. The Sidney listings below put companies that mention gas appliance or dryer work first, followed by other appliance repair companies nearby.

Gas Dryer Repair Companies Serving Sidney, MT

Our data shows 6 appliance repair companies inside a 87-mile radius of Sidney. 1 list an address in Sidney, and other nearby bases include Dickinson (3), Williston (1), and Glendive (1). The farthest listed company is about 86 miles out. 2 list gas appliance or dryer work specifically. Nearest on the list: Marty’s Appliance Repair, around 0.8 miles out. Across 4 rated companies, the average public rating is 3.5 stars. Sidney is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
2308 11th Ave W, Williston, ND 58801
39.6 mi from Sidney
★ 1.0 (1 review)
DryersWashersSaturday hours
Appliance Repair
Marty’s Appliance Repair
1601 Sunflower Ln, Sidney, MT 59270
0.8 mi from Sidney
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
1515 W Bell St, Glendive, MT 59330
49.9 mi from Sidney
DryersWashersSaturday hours
Appliance Repair
Jones Heating and Refrigeration LLC
4740 1st St SW, Dickinson, ND 58601
84.8 mi from Sidney
★★★★★ 4.9 (368 reviews)
Saturday hours
Appliance Repair
Joe's Video & Appliance.
646 2nd St W, Dickinson, ND 58601
86.3 mi from Sidney
★★★★½ 4.5 (8 reviews)
Saturday hours
Appliance Repair
Fleck's Furniture & Appliance
1214 Villard St W, Dickinson, ND 58601
86.1 mi from Sidney
★★★½ 3.5 (54 reviews)
Saturday hours

Companies are shown by relevance and distance from Sidney. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Repair market snapshot: Sidney, MT
Appliance repair companies in range (87 mi)6
Mention gas appliance work0
Distance to the three closest (mi)0.8, 39.6, 49.9
Open on Saturdays (per listing)6
Rated 4.5 stars or higher (10+ reviews)1
Show laundry appliance work2

The leading options for Sidney are Sears Appliance Repair (39.6 miles away, based in Williston, 1.0 stars from 1 reviews, lists Saturday hours); Marty’s Appliance Repair (0.8 miles away, lists Saturday hours); Sears Appliance Repair (49.9 miles away, based in Glendive, lists Saturday hours); Jones Heating and Refrigeration LLC (84.8 miles away, based in Dickinson, 4.9 stars from 368 reviews, lists Saturday hours).

⚡ Tell us the fuel type and the symptom and we will connect you
☎(888) 772-9805

How Gas and Electric Dryers Differ

How a gas dryer heatsA gas dryer lights a burner with a hot-surface igniter, opens the gas valve through a set of coils and uses a flame sensor to confirm ignition. When the sequence fails, the drum keeps turning but the air stays cool.
How an electric dryer heatsAn electric dryer runs current through a coiled heating element, protected by a thermal fuse and cycling and high-limit thermostats. It needs both legs of a 240-volt circuit to heat.

Fixr puts electric dryer repairs at roughly $50 to $400 and gas dryer repairs at roughly $100 to $450. Source: Fixr - How much does it cost to repair a dryer?

Gas Dryer Parts That Fail

Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.

Electric Dryer Parts That Fail

Power supplyElectric dryers run on a 240-volt circuit. A tripped breaker on one leg can leave the drum spinning with no heat, which is why a technician checks the outlet before ordering parts.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

Gas Dryer Safety

If you smell gas strongly or are unsure, leave the building and call the gas company or 911 once you are outside; do not use light switches, appliance controls, phones near the odor, or anything that could spark. Source: Connecticut Public Utilities Regulatory Authority - What To Do If You Smell Natural Gas

Have a professional inspect a gas dryer's gas line and connection for leaks and damage. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

More: gas dryer not heating and dryer not heating.

Dryer Heating Repair Cost Ranges

Gas and electric dryers have different heat-source parts but similar labor. Published ranges for common repairs:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What Sidney Owners Should Know

Most dryer calls in Sidney come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits

In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.

Before You Book in Sidney

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • Do you work on gas dryers, and who handles anything involving the gas line?

Gas & Electric Dryer Repair FAQs: Sidney, MT

How do I know if my dryer is gas or electric?
A gas dryer has a gas pipe and shutoff valve behind it and plugs into a regular household outlet. An electric dryer plugs into a large 240-volt outlet and has no gas line. The rating label inside the door also says which it is.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your dryer is still under manufacturer coverage, contact the brand first.
Who can work on a gas dryer?
Many appliance repair companies service gas dryers, including igniters, valve coils and burners. Work on the gas supply line itself may require a licensed gas or plumbing contractor depending on your state.

Related Repair Pages for Sidney

Gas & Electric Dryer Repair in Nearby Cities

Before a technician visits, confirm the gas shutoff behind the dryer is open (or the breaker is on for an electric model) and clean the lint screen. If you smell gas, leave first and call your gas utility.

Get connected with a gas or electric dryer technician near Sidney
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech