Serving Hobbs, New Mexico and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Gas & Electric Dryer Repair in Hobbs, NM

Whether your dryer runs on natural gas, propane or a 240-volt circuit, these are the technicians who serve Hobbs.

Gas dryer not heating in Hobbs?
One call reaches an independent dryer technician near Hobbs.
☎(888) 772-9805
✓6 companies listed for Hobbs✓Independent, not a manufacturer✓Public ratings & distances

The fastest way to narrow down a dryer that will not heat is to know how it heats: a gas burner with an igniter and valve, or an electric element on a 240-volt circuit. Below are independent repair companies within reach of Hobbs, with those that list gas appliance or dryer work shown first.

Gas & Electric Dryer Repair Near Hobbs

Our data shows 6 appliance repair companies inside a 77-mile radius of Hobbs. 1 of them are based in Hobbs itself, and the rest are spread across Odessa (2), Seminole (1), and Plains (1). Distances run up to about 77 miles. Of those, 3 mention gas appliance or dryer work by name. Nearest on the list: Sears Appliance Repair, around 1.0 miles out. Rated companies nearby average 3.7 stars across 5 businesses. Hobbs is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
2220 N Grimes St, Hobbs, NM 88240
1.0 mi from Hobbs
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4511 N Midkiff Rd Sp C, Midland, TX 79705
77.0 mi from Hobbs
★★★½ 3.7 (50 reviews)
DryersWashersSaturday hours
Appliance Repair
David's Appliance Repair
102 12th St, Plains, TX 79355
36.8 mi from Hobbs
★★★★★ 4.8 (4 reviews)
Washer & Dryer Repair
Sears Appliance Repair
4101 E 42nd St, Odessa, TX 79762
74.7 mi from Hobbs
★★★½ 3.5 (43 reviews)
DryersWashersSaturday hours
Appliance Repair
Fehr's Appliance Repair Center
251 Co Rd 306, Seminole, TX 79360
28.6 mi from Hobbs
★★★ 3.0 (1 review)
Saturday hours
Appliance Repair
ASAP Laundry Equipment
6204 W Mockingbird Ln, Odessa, TX 79763
74.0 mi from Hobbs
★★★½ 3.5 (2 reviews)
Saturday hours

Companies are shown by relevance and distance from Hobbs. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Hobbs repair companies in numbers
With 4.5+ stars and at least 10 reviews0
Mention gas appliance work0
Open on Saturdays (per listing)5
Distance to the three closest (mi)1.0, 28.6, 36.8
Repair companies inside 77 miles6
List dryer or washer & dryer work4

At the top of the Hobbs list: Sears Appliance Repair (1.0 miles away, lists Saturday hours); Sears Appliance Repair (77.0 miles away, based in Midland, 3.7 stars from 50 reviews, lists Saturday hours); David's Appliance Repair (36.8 miles away, based in Plains, 4.8 stars from 4 reviews); Sears Appliance Repair (74.7 miles away, based in Odessa, 3.5 stars from 43 reviews, lists Saturday hours).

⚡ Get connected with a gas or electric dryer technician near Hobbs
☎(888) 772-9805

Gas vs. Electric: How Each One Heats

How an electric dryer heatsAn electric dryer runs current through a coiled heating element, protected by a thermal fuse and cycling and high-limit thermostats. It needs both legs of a 240-volt circuit to heat.
How a gas dryer heatsA gas dryer lights a burner with a hot-surface igniter, opens the gas valve through a set of coils and uses a flame sensor to confirm ignition. When the sequence fails, the drum keeps turning but the air stays cool.

Angi says gas dryer repairs typically run about $50 to $100 more than comparable electric dryer repairs. Source: Angi - How Much Does It Cost to Repair a Dryer?

What a Technician Checks on a Gas Dryer

Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

What a Technician Checks on an Electric Dryer

Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

If You Smell Gas

Have a professional inspect a gas dryer's gas line and connection for leaks and damage. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

A dryer exhaust system carries combustion gases including carbon monoxide out of the home, so HUD rates a detached, missing or blocked dryer exhaust as a life-threatening deficiency; a CO alarm in the laundry area is recommended with gas dryers. Source: U.S. HUD - NSPIRE Standard: Clothes Dryer Exhaust Ventilation

More: gas dryer not heating and dryer not heating.

Dryer Heating Repair Cost Ranges

Here is what published cost guides report for the heat-source parts and other common dryer repairs:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Local Notes for Hobbs

Most dryer calls in Hobbs come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Natural gas piping and gas appliance work needs a Construction Industries Division MM-2 (natural gas fitting) or MM-98 (mechanical) license, with journeyman gas fitter certification for workers; the plumbing-only MM-1 class excludes gas appliances and gas piping, and LP gas systems fall under a separate LP gas classification. Source: CID License Classifications and Scopes (City of Albuquerque)

New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)

Questions to Ask a Hobbs Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • Is your company licensed where my state requires it, and insured?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Gas & Electric Dryer Repair FAQs: Hobbs, NM

How do I know if my dryer is gas or electric?
A gas dryer has a gas pipe and shutoff valve behind it and plugs into a regular household outlet. An electric dryer plugs into a large 240-volt outlet and has no gas line. The rating label inside the door also says which it is.
Who can work on a gas dryer?
Many appliance repair companies service gas dryers, including igniters, valve coils and burners. Work on the gas supply line itself may require a licensed gas or plumbing contractor depending on your state.
Are you affiliated with any dryer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your dryer is still under manufacturer coverage, contact the brand first.

Other Dryer Repair in Hobbs

Gas & Electric Dryer Repair in Nearby Cities

Note whether your dryer is natural gas, propane or electric, and what happens when you press Start. That tells a Hobbs technician which parts to bring.

One call to reach a local dryer tech
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech