Serving Klamath Falls, Oregon and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Gas & Electric Dryer Repair in Klamath Falls, OR

Whether your dryer runs on natural gas, propane or a 240-volt circuit, these are the technicians who serve Klamath Falls.

Dryer runs but no heat in Klamath Falls?
One call reaches an independent dryer technician near Klamath Falls.
☎(888) 772-9805
✓7 companies listed for Klamath Falls✓Independent, not a manufacturer✓Public ratings & distances

A gas dryer that tumbles but stays cold usually points to the ignition system, while an electric dryer with the same symptom points to the element, fuses or power supply. Below are independent repair companies within reach of Klamath Falls, with those that list gas appliance or dryer work shown first.

Gas & Electric Dryer Repair Near Klamath Falls

7 repair companies serve Klamath Falls from within 60 miles. 3 of them are based in Klamath Falls itself, and other nearby bases include Medford (4). CHC Appliance and Repair LLC is the nearest, roughly 0.4 miles from Klamath Falls. 1 of them mentions gas appliance or dryer work in their listing or website. The 7 rated companies in range average 4.6 stars. Klamath Falls is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
4311 S 6th St, Klamath Falls, OR 97603
2.2 mi from Klamath Falls
★★★★½ 4.6 (15 reviews)
DryersWashersSaturday hours
Appliance Repair
Merits Home Center
1407 Owens St, Klamath Falls, OR 97601
0.5 mi from Klamath Falls
★★★★½ 4.5 (239 reviews)
Saturday hours
Appliance Repair
CHC Appliance and Repair LLC
914 Oak Ave, Klamath Falls, OR 97601
0.4 mi from Klamath Falls
★★★★★ 4.9 (75 reviews)
Saturday hours
Appliance Repair
C&R Appliance Services
718 Black Oak Dr STE A, Medford, OR 97504
54.6 mi from Klamath Falls
★★★★★ 4.8 (438 reviews)
Appliance Repair
Just-in Time Appliance Repair
328 S Central Ave #208, Medford, OR 97501
56.4 mi from Klamath Falls
★★★★★ 4.8 (233 reviews)
Saturday hours
Appliance Repair
Interstate Appliance Service
817 N Central Ave # C, Medford, OR 97501
57.0 mi from Klamath Falls
★★★★½ 4.5 (33 reviews)
Appliance Repair
Surgeon Family Appliance
1513 N Riverside Ave, Medford, OR 97501
57.0 mi from Klamath Falls
★★★★ 3.9 (142 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Klamath Falls repair companies in numbers
With 4.5+ stars and at least 10 reviews6
Mention gas appliance work0
Distance to the three closest (mi)0.4, 0.5, 2.2
Show laundry appliance work1
Companies within 60 miles7
Listing Saturday hours5

First up for Klamath Falls: Sears Appliance Repair (2.2 miles away, 4.6 stars from 15 reviews, lists Saturday hours); Merits Home Center (0.5 miles away, 4.5 stars from 239 reviews, lists Saturday hours); CHC Appliance and Repair LLC (0.4 miles away, 4.9 stars from 75 reviews, lists Saturday hours); C&R Appliance Services (54.6 miles away, based in Medford, 4.8 stars from 438 reviews).

⚡ Tell us the fuel type and the symptom and we will connect you
☎(888) 772-9805

Which Kind of Dryer Do You Have?

How a gas dryer heatsA gas dryer lights a burner with a hot-surface igniter, opens the gas valve through a set of coils and uses a flame sensor to confirm ignition. When the sequence fails, the drum keeps turning but the air stays cool.
What they shareBoth types use the same drum, belt, rollers, motor and blower, and both depend on a clear vent. Many no-heat calls on either type start and end with the vent.

Fixr puts electric dryer repairs at roughly $50 to $400 and gas dryer repairs at roughly $100 to $450. Source: Fixr - How much does it cost to repair a dryer?

No Heat on a Gas Dryer

Drive motorIf the dryer hums but the drum does not move, or it starts only after a push, the motor or its start circuit is tested. On many models the motor also turns the blower wheel, so airflow and tumbling fail together.
Igniter, valve coils and flame sensorGas dryers light the burner with a glowing igniter, open the gas valve with a set of coils and confirm the flame with a sensor. When the igniter glows but the burner never lights, the valve coils are a frequent culprit.

Electric Dryer Parts That Fail

Heating elementElectric dryers heat with a coiled element. If the drum turns but the air stays cool, the element is checked for continuity along with the thermostats and fuses that feed it.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.

If You Smell Gas

Never turn back on gas that was shut off for safety, and have gas line work done by a licensed plumber or the gas company. Source: Connecticut Public Utilities Regulatory Authority - What To Do If You Smell Natural Gas

Have a professional inspect a gas dryer's gas line and connection for leaks and damage. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

More: gas dryer not heating and dryer not heating.

What Heat-Source Repairs Cost

Gas and electric dryers have different heat-source parts but similar labor. Published ranges for common repairs:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Local Notes for Klamath Falls

Most dryer calls in Klamath Falls come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Businesses that install, alter or repair LP gas appliances, piping or vent connections need an LP gas installation license, and the individuals doing the work need a fitter license, both from the Oregon State Fire Marshal; natural gas licensing was not confirmed. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.

How to Choose a Dryer Technician Near Klamath Falls

  • Is your company licensed where my state requires it, and insured?
  • Can you look at the washer on the same visit if it is acting up too?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Gas & Electric Dryer Repair FAQs: Klamath Falls, OR

Who can work on a gas dryer?
Many appliance repair companies service gas dryers, including igniters, valve coils and burners. Work on the gas supply line itself may require a licensed gas or plumbing contractor depending on your state.
Which areas near Klamath Falls do these technicians cover?
The companies on this page are within driving distance of Klamath Falls. Each one sets its own service area, so check the distance shown and confirm your address when you call.
Is my dryer gas or electric?
A gas dryer has a gas pipe and shutoff valve behind it and plugs into a regular household outlet. An electric dryer plugs into a large 240-volt outlet and has no gas line. The rating label inside the door also says which it is.
Is a gas smell from the dryer an emergency?
Yes. Do not operate switches or the dryer. Leave the house and call your gas utility or 911 from outside, and only call a repair company after the utility says it is safe.

Other Dryer Repair in Klamath Falls

Gas & Electric Dryer Repair in Nearby Cities

Before a technician visits, confirm the gas shutoff behind the dryer is open (or the breaker is on for an electric model) and clean the lint screen. If you smell gas, leave first and call your gas utility.

One call to reach a local dryer tech
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech