Serving Moab, Utah and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Gas & Electric Dryer Repair in Moab, UT

Whether your dryer runs on natural gas, propane or a 240-volt circuit, these are the technicians who serve Moab.

Dryer runs but no heat in Moab?
Call our helpline to be connected with a technician who repairs gas and electric dryers.
☎(888) 772-9805
✓6 companies listed for Moab✓Independent, not a manufacturer✓Public ratings & distances

The fastest way to narrow down a dryer that will not heat is to know how it heats: a gas burner with an igniter and valve, or an electric element on a 240-volt circuit. Below are independent repair companies within reach of Moab, with those that list gas appliance or dryer work shown first.

Dryer Technicians for Gas and Electric Models, Moab

We found 6 appliance repair companies within 63 miles of Moab. 1 list an address in Moab, and other nearby bases include Grand Junction (5). Distances run up to about 63 miles. The closest is Appliances 4 Less Moab, about 2.7 miles away. 2 list gas appliance or dryer work specifically. Rated companies nearby average 4.5 stars across 5 businesses. Because the nearest shops are farther out, ask each company whether Moab is inside its regular service area.

Washer & Dryer Repair
Century Appliance, LLC
2376 Broadway, Grand Junction, CO 81507
61.0 mi from Moab
★★★★½ 4.4 (108 reviews)
DryersWashers
Appliance Repair
Appliances 4 Less Moab
2151 S Hwy 191, Moab, UT 84532
2.7 mi from Moab
★★★★★ 5.0 (9 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
2424 US-6, Grand Junction, CO 81505
62.4 mi from Moab
DryersWashersSaturday hours
Appliance Repair
All Temp Services Inc.
714 A Scarlet Dr, Grand Junction, CO 81505
61.5 mi from Moab
★★★★★ 4.9 (18 reviews)
Appliance Repair
V & L Appliance Services.
591 25 Rd #A6, Grand Junction, CO 81505
62.8 mi from Moab
★★★★ 3.8 (26 reviews)
Saturday hours
Appliance Repair
Black Moutain Appliance Repair
1149 Micaelas Ct, Grand Junction, CO 81503
62.8 mi from Moab
★★★★½ 4.3 (6 reviews)

Companies are shown by relevance and distance from Moab. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Repair market snapshot: Moab, UT
Listing Saturday hours3
Three nearest companies, miles away2.7, 61.0, 61.5
Mention gas appliance work0
Repair companies inside 63 miles6
Rated 4.5 stars or higher (10+ reviews)1
Show laundry appliance work2

Closest matches for Moab: Century Appliance, LLC (61.0 miles away, based in Grand Junction, 4.4 stars from 108 reviews); Appliances 4 Less Moab (2.7 miles away, 5.0 stars from 9 reviews, lists Saturday hours); Sears Appliance Repair (62.4 miles away, based in Grand Junction, lists Saturday hours); All Temp Services Inc. (61.5 miles away, based in Grand Junction, 4.9 stars from 18 reviews).

⚡ Get connected with a gas or electric dryer technician near Moab
☎(888) 772-9805

Gas vs. Electric: How Each One Heats

Propane conversionsGas dryers are set up for natural gas or propane, and switching requires the manufacturer's conversion parts. That work should be done by someone qualified for gas work.
What they shareBoth types use the same drum, belt, rollers, motor and blower, and both depend on a clear vent. Many no-heat calls on either type start and end with the vent.

Fixr puts electric dryer repairs at roughly $50 to $400 and gas dryer repairs at roughly $100 to $450. Source: Fixr - How much does it cost to repair a dryer?

What a Technician Checks on a Gas Dryer

Gas supply and shutoffA gas dryer needs an open shutoff valve and a sound flexible connector. Technicians check the supply before the burner assembly, and leave connector replacement or line work to whoever your state allows to do gas work.
Igniter, valve coils and flame sensorGas dryers light the burner with a glowing igniter, open the gas valve with a set of coils and confirm the flame with a sensor. When the igniter glows but the burner never lights, the valve coils are a frequent culprit.

Electric Dryer Parts That Fail

Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.
Power supplyElectric dryers run on a 240-volt circuit. A tripped breaker on one leg can leave the drum spinning with no heat, which is why a technician checks the outlet before ordering parts.

Gas Dryer Safety

A dryer exhaust system carries combustion gases including carbon monoxide out of the home, so HUD rates a detached, missing or blocked dryer exhaust as a life-threatening deficiency; a CO alarm in the laundry area is recommended with gas dryers. Source: U.S. HUD - NSPIRE Standard: Clothes Dryer Exhaust Ventilation

Never turn back on gas that was shut off for safety, and have gas line work done by a licensed plumber or the gas company. Source: Connecticut Public Utilities Regulatory Authority - What To Do If You Smell Natural Gas

More: gas dryer not heating and dryer not heating.

Dryer Heating Repair Cost Ranges

Here is what published cost guides report for the heat-source parts and other common dryer repairs:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Local Notes for Moab

Most dryer calls in Moab come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

Questions to Ask a Moab Technician

  • Can you give a written estimate before ordering parts?
  • Can you look at the washer on the same visit if it is acting up too?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Gas & Electric Dryer Repair FAQs: Moab, UT

Who can work on a gas dryer?
Many appliance repair companies service gas dryers, including igniters, valve coils and burners. Work on the gas supply line itself may require a licensed gas or plumbing contractor depending on your state.
Are you affiliated with any dryer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your dryer is still under manufacturer coverage, contact the brand first.
Is my dryer gas or electric?
A gas dryer has a gas pipe and shutoff valve behind it and plugs into a regular household outlet. An electric dryer plugs into a large 240-volt outlet and has no gas line. The rating label inside the door also says which it is.

More Laundry Repair in Moab, UT

Gas & Electric Dryer Repair in Nearby Cities

Note whether your dryer is natural gas, propane or electric, and what happens when you press Start. That tells a Moab technician which parts to bring.

One call to reach a local dryer tech
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech