Serving Farmers Loop, Alaska and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Farmers Loop, AK

Independent repair companies near Farmers Loop that work on GE dryers, with companies that mention GE listed first.

Talk to a GE dryer tech in Farmers Loop
One call reaches an independent technician near Farmers Loop who works on GE.
☎(888) 772-9805
✓6 companies listed for Farmers Loop✓Independent, not a manufacturer✓Public ratings & distances

A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Farmers Loop list starts with companies that name GE, followed by other appliance repair companies that list dryer work.

Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.

Who Works on GE Dryers Near Farmers Loop

Within 237 miles of Farmers Loop there are 6 appliance repair companies in our data. The rest are spread across Fairbanks (3), Wasilla (2), and Palmer (1). Distances run up to about 236 miles. The closest is Appliance Service Company, about 5.5 miles away. No company within 90 miles of Farmers Loop mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 6 rated companies, the average public rating is 3.9 stars. Farmers Loop is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
3115 Airport Way, Fairbanks, AK 99709
5.7 mi from Farmers Loop
★ 1.0 (1 review)
DryersWashersSaturday hours
Appliance Repair
Appliance Service Company
700 23rd Ave, Fairbanks, AK 99701
5.5 mi from Farmers Loop
★★★★ 4.1 (47 reviews)
Appliance Repair
Goldstream Appliance Repair
1209 Shypoke Dr #2586, Fairbanks, AK 99709
9.1 mi from Farmers Loop
★★★★★ 5.0 (9 reviews)
Appliance Repair
Reliable Appliance
950 S Hermon Rd, Wasilla, AK 99654
236.2 mi from Farmers Loop
★★★★★ 4.8 (325 reviews)
Dryers
Washer & Dryer Repair
Alaskan Appliance Repair
105 E Arctic Ave, Palmer, AK 99645
232.2 mi from Farmers Loop
★★★½ 3.6 (37 reviews)
DryersWashersSaturday hours
Appliance Repair
Denali Appliance Services
N Boundary St, Wasilla, AK 99654
236.0 mi from Farmers Loop
★★★★★ 4.9 (47 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Farmers Loop, AK
Open on Saturdays (per listing)3
Three nearest companies, miles away5.5, 5.7, 9.1
Rated 4.5 stars or higher (10+ reviews)2
Repair companies inside 237 miles6
List dryer or washer & dryer work3
Mention GE0

At the top of the Farmers Loop list: Sears Appliance Repair (5.7 miles away, based in Fairbanks, 1.0 stars from 1 reviews, lists Saturday hours); Appliance Service Company (5.5 miles away, based in Fairbanks, 4.1 stars from 47 reviews); Goldstream Appliance Repair (9.1 miles away, based in Fairbanks, 5.0 stars from 9 reviews); Reliable Appliance (236.2 miles away, based in Wasilla, 4.8 stars from 325 reviews).

⚡ Call to reach an independent GE dryer tech
☎(888) 772-9805

GE Dryer Features Technicians Work On

GE Profile UltraFast ComboAn all-in-one washer/dryer that dries with ventless inverter heat pump technology, so it needs no outside vent and runs on a 120V plug.
SmartHQ appGE Appliances' Wi-Fi app for managing smart laundry remotely, including cycle control and notifications such as a clogged lint filter on the Combo.

How GE Dryers Are Built

An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

Common GE Dryer Problems

  • Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
  • Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats

GE Dryer Error Codes

CodeWhat it means
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

Signs Your GE Dryer Needs a Technician

  • Drum will not turn even though you hear a hum
  • Burning or hot smell during a cycle
  • Squealing, thumping or grinding while it runs

What Gets Fixed on a Farmers Loop Dryer Call

Power supplyElectric dryers run on a 240-volt circuit. A tripped breaker on one leg can leave the drum spinning with no heat, which is why a technician checks the outlet before ordering parts.
Heating elementElectric dryers heat with a coiled element. If the drum turns but the air stays cool, the element is checked for continuity along with the thermostats and fuses that feed it.

Keeping a GE Dryer Running

Brand guides: GE Dryer Not Heating: What to Check.

Budgeting for a GE Dryer Repair

Price the repair before replacing a GE dryer. Published ranges for common jobs:

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Getting Ready for the Repair

  • How long the vent run is and where it exits the house
  • Any error code on the display
  • What happens when you press Start (no response, hum, runs with no heat, stops early)

What Farmers Loop Owners Should Know

Most dryer calls in Farmers Loop come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Alaska has no separate appliance repair license category; its certificates of fitness and contractor licenses cover plumbing, gas piping, electrical and construction work rather than appliance repair itself. Source: Mechanical Inspection - License Requirements (Alaska DOLWD)

In Alaska, you can check a license with the Alaska Division of Corporations, Business and Professional Licensing - License Search or report a problem to the Alaska Department of Law, Attorney General's Consumer Protection Unit.

Before You Book in Farmers Loop

  • Do you work on gas dryers, and who handles anything involving the gas line?
  • If a part has to be ordered, how soon can you come back to finish?
  • Will you check the vent and lint path as part of the visit?

GE Dryer Repair FAQs: Farmers Loop, AK

Why does my GE dryer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.
Why is my dryer running but not heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Why do my clothes come out damp?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.

Related Repair Pages for Farmers Loop

More GE Dryer Repair Pages Nearby

Write down any error code your GE dryer shows and when it appears. It helps a Farmers Loop technician bring the right parts.

Get connected with a GE dryer technician near Farmers Loop
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech