GE owners in Anniston usually want two things from a repair company: experience with the brand and quick access to parts. The Anniston list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Dryer Technicians, Anniston AL
Our data shows 14 appliance repair companies inside a 30-mile radius of Anniston. 4 list an address in Anniston, and other nearby bases include Gadsden (2), Pell City (2), and Jacksonville (1). None of the repair companies near Anniston name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. BRIAN'S SERVICE CO. is the nearest, roughly 0.4 miles from Anniston. Rated companies nearby average 4.3 stars across 13 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 5 |
|---|---|
| Appliance repair companies in range (30 mi) | 14 |
| Open on Saturdays (per listing) | 10 |
| Distance to the three closest (mi) | 0.4, 1.4, 4.9 |
| Mention GE | 0 |
| Show laundry appliance work | 4 |
First up for Anniston: Coopers Appliance (9.4 miles away, based in Eastaboga, 5.0 stars from 13 reviews, lists Saturday hours); Sears Appliance Repair (27.4 miles away, based in Pell City, 4.6 stars from 507 reviews, lists Saturday hours); Southern Fix Appliance Repair (23.7 miles away, based in Rainbow City, 4.9 stars from 131 reviews, lists Saturday hours); Sears Appliance Repair (25.0 miles away, based in Gadsden, 4.4 stars from 76 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Drum turns but the air stays cool
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Anniston Owners Should Know
Most dryer calls in Anniston come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Alabama does not issue a separate appliance repair license, and the state's heating, air conditioning and refrigeration contractor law expressly excludes work on household appliances, residential refrigerators and ice machines. Source: Code of Alabama 1975, Section 34-31-18 et seq. (Alabama Board of Heating, Air Conditioning & Refrigeration Contractors)
In Alabama, you can check a license with the Alabama Plumbers and Gas Fitters Examining Board Individual Licensee Search or report a problem to the Alabama Attorney General's Office, Consumer Interest Division.
Questions to Ask a Anniston Technician
- Do you work on gas dryers, and who handles anything involving the gas line?
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Anniston, AL
How do I find a technician who knows GE dryers?
Do you work for GE?
Why does my dryer take so long to dry?
What should I do about a GE error code?
More Laundry Repair in Anniston, AL
GE Dryer Repair Near Anniston
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.