GE owners in Van Buren usually want two things from a repair company: experience with the brand and quick access to parts. The Van Buren list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Independent GE Dryer Technicians, Van Buren AR
13 repair companies serve Van Buren from within 30 miles. 4 list an address in Van Buren, and other nearby bases include Fort Smith (7), Alma (1), and Winslow (1). The farthest listed company is about 30 miles out. None of the repair companies near Van Buren name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. All Pro Appliance is the nearest, roughly 0.5 miles from Van Buren. Rated companies nearby average 4.5 stars across 12 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 6 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Companies within 30 miles | 13 |
| Mention GE | 0 |
| List dryer or washer & dryer work | 2 |
| Three nearest companies, miles away | 0.5, 0.7, 1.9 |
First up for Van Buren: Affordable Appliances Fort Smith (3.6 miles away, based in Fort Smith, 4.6 stars from 198 reviews, lists Saturday hours); ALL-IN appliance repair (29.9 miles away, based in Winslow, 4.9 stars from 112 reviews); A-Tech Appliance Service (5.9 miles away, based in Fort Smith, 4.7 stars from 310 reviews); Fix-it Guys, LLC Appliance Repair (8.0 miles away, based in Fort Smith, 4.8 stars from 58 reviews).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Burning or hot smell during a cycle
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Around Van Buren
Most dryer calls in Van Buren come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
Natural gas piping and equipment work is governed by the state plumbing and fuel gas codes, and gas fitters are licensed by the Arkansas Department of Health's Plumbing and Natural Gas program. Source: Plumbing & Natural Gas - Arkansas Department of Health
Before You Book in Van Buren
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Van Buren, AR
Why is my dryer running but not heating?
What should I do about a GE error code?
Which Van Buren technicians work on GE?
Why does my dryer take so long to dry?
Other Dryer Repair in Van Buren
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.