GE owners in West Memphis usually want two things from a repair company: experience with the brand and quick access to parts. The West Memphis list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near West Memphis
24 repair companies serve West Memphis from within 30 miles. 1 list an address in West Memphis, and other nearby bases include Memphis (10), Bartlett (4), and Millington (2). Distances run up to about 30 miles. The closest is Delta Appliance Services, about 1.3 miles away. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Across 23 rated companies, the average public rating is 3.9 stars.
Companies are shown by relevance and distance from West Memphis. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 1.3, 4.0, 8.4 |
|---|---|
| List dryer or washer & dryer work | 5 |
| Companies within 30 miles | 24 |
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Open on Saturdays (per listing) | 12 |
First up for West Memphis: Sears Appliance Repair (56.1 miles away, based in Blytheville, 4.4 stars from 25 reviews, lists Saturday hours); Sears Appliance Repair (23.3 miles away, based in Memphis, 4.6 stars from 941 reviews, lists Saturday hours); Mr. Appliance of Memphis (25.4 miles away, based in Cordova, 4.7 stars from 1,977 reviews); Denmark Appliance Repair LLC (28.4 miles away, based in Lakeland, 4.4 stars from 110 reviews).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
What West Memphis Owners Should Know
Most dryer calls in West Memphis come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
Natural gas piping and equipment work is governed by the state plumbing and fuel gas codes, and gas fitters are licensed by the Arkansas Department of Health's Plumbing and Natural Gas program. Source: Plumbing & Natural Gas - Arkansas Department of Health
Before You Book in West Memphis
- Can you give a written estimate before ordering parts?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: West Memphis, AR
Should I repair or replace my GE dryer?
Why does my GE dryer show an error code?
Do you work for GE?
Other Dryer Repair in West Memphis
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.