GE owners in Bullhead City usually want two things from a repair company: experience with the brand and quick access to parts. The Bullhead City list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Bullhead City
Within 60 miles of Bullhead City there are 16 appliance repair companies in our data. 5 of them are based in Bullhead City itself, and other nearby bases include Kingman (5), Lake Havasu City (4), and Fort Mohave (1). None of the repair companies near Bullhead City name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Woodland Appliance Repair Solutions is the nearest, roughly 1.6 miles from Bullhead City. Across 11 rated companies, the average public rating is 4.3 stars. Bullhead City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Bullhead City. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Open on Saturdays (per listing) | 9 |
|---|---|
| List dryer or washer & dryer work | 1 |
| Three nearest companies, miles away | 1.6, 1.7, 3.1 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention GE | 0 |
| Companies within 60 miles | 16 |
First up for Bullhead City: T.B APPLIANCE’S (28.4 miles away, based in Kingman, 5.0 stars from 468 reviews, lists Saturday hours); Empire Appliance Repair Response (3.1 miles away, 5.0 stars from 4 reviews); Ambient Edge Heating, Air Conditioning & Refrigeration Inc. (31.7 miles away, based in Kingman, 4.7 stars from 1,911 reviews, lists Saturday hours); Sears Appliance Repair (46.0 miles away, based in Lake Havasu City, 4.5 stars from 274 reviews, lists Saturday hours).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Common GE Dryer Problems
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Any error code on the display
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Bullhead City, AZ
Most dryer calls in Bullhead City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
How to Choose a Dryer Technician Near Bullhead City
- Do you work on gas dryers, and who handles anything involving the gas line?
- Can you look at the washer on the same visit if it is acting up too?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Bullhead City, AZ
Which Bullhead City technicians work on GE?
Is this GE customer service?
Why does my GE dryer show an error code?
Why is my dryer running but not heating?
Other Dryer Repair in Bullhead City
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Bullhead City technician bring the right parts.