A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The New Kingman-Butler list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near New Kingman-Butler
We found 16 appliance repair companies within 60 miles of New Kingman-Butler. The rest are spread across Kingman (5), Bullhead City (5), and Lake Havasu City (4). Action Appliance is the nearest, roughly 1.2 miles from New Kingman-Butler. No company within 90 miles of New Kingman-Butler mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.3 stars across 11 businesses. Because the nearest shops are farther out, ask each company whether New Kingman-Butler is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.2, 2.3, 2.8 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Listing Saturday hours | 9 |
| Appliance repair companies in range (60 mi) | 16 |
| Mention GE | 0 |
| Show laundry appliance work | 1 |
At the top of the New Kingman-Butler list: T.B APPLIANCE’S (5.7 miles away, based in Kingman, 5.0 stars from 468 reviews, lists Saturday hours); Ambient Edge Heating, Air Conditioning & Refrigeration Inc. (2.3 miles away, based in Kingman, 4.7 stars from 1,911 reviews, lists Saturday hours); Attwoods Appliances LLC (2.8 miles away, based in Kingman, 4.2 stars from 289 reviews, lists Saturday hours); Kingman bbq cleaning and repair (5.2 miles away, based in Kingman, lists Saturday hours).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Outside of the cabinet gets unusually hot
- Dryer shuts off a few minutes into the cycle
- Squealing, thumping or grinding while it runs
How a Dryer Service Call Usually Goes in New Kingman-Butler
Care GE Recommends for Its Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
Around New Kingman-Butler
Most dryer calls in New Kingman-Butler come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
The Arizona Registrar of Contractors licenses gas piping and gas appliance work under its plumbing classifications (such as C-37 and R-37), which cover piping and appliances for natural and manufactured gas. Source: License Classifications - Arizona Registrar of Contractors
Questions to Ask a New Kingman-Butler Technician
- Is your company licensed where my state requires it, and insured?
- Can you look at the washer on the same visit if it is acting up too?
- Can you give a written estimate before ordering parts?
GE Dryer Repair FAQs: New Kingman-Butler, AZ
Why does my dryer take so long to dry?
Should I repair or replace my GE dryer?
Which New Kingman-Butler technicians work on GE?
Related Repair Pages for New Kingman-Butler
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.