If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Basalt list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Basalt
Within 60 miles of Basalt there are 15 appliance repair companies in our data. The rest are spread across Edwards (2), Avon (2), and Leadville (2). Distances run up to about 59 miles. The closest is westernslope.appliance, about 18.4 miles away. 1 lists GE specifically. The 14 rated companies in range average 3.4 stars. Basalt is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 18.4, 19.9, 21.3 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| Appliance repair companies in range (60 mi) | 15 |
| Show laundry appliance work | 4 |
| Open on Saturdays (per listing) | 5 |
| Mention GE | 1 |
The leading options for Basalt are Sears Appliance Repair (57.1 miles away, based in Gunnison, 1.0 stars from 1 reviews, lists Saturday hours); Andy's Appliance Repair (40.5 miles away, based in Leadville, 5.0 stars from 19 reviews); Mr. Appliance of Vail, Aspen, and Glenwood (34.5 miles away, based in Avon, 4.9 stars from 256 reviews); Sears Appliance Repair (41.6 miles away, based in Rifle, 1.0 stars from 1 reviews, lists Saturday hours).
Know Your GE Dryer
How GE Dryers Are Built
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Outside of the cabinet gets unusually hot
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Basalt
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Local Notes for Basalt
Most dryer calls in Basalt come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Questions to Ask a Basalt Technician
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Basalt, CO
Why does my GE dryer show an error code?
What makes a dryer stop heating?
Why does my dryer take so long to dry?
Other Dryer Repair in Basalt
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Basalt technician bring the right parts.