A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Colorado Springs
Within 30 miles of Colorado Springs there are 38 appliance repair companies in our data. 33 list an address in Colorado Springs, and the rest are spread across Manitou Springs (2), Monument (1), and Woodland Park (1). None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Appliance Service Co, around 1.4 miles out. The 34 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 30 miles | 38 |
|---|---|
| Listing Saturday hours | 27 |
| Three nearest companies, miles away | 1.4, 1.4, 2.1 |
| Mention GE | 0 |
| Show laundry appliance work | 10 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
The leading options for Colorado Springs are GE Monogram Repair Expert (38.1 miles away, based in Castle Rock, 4.9 stars from 91 reviews, lists Saturday hours); Sears Appliance Repair (89.7 miles away, based in La Junta, 4.3 stars from 11 reviews, lists Saturday hours); D3/A-OK Appliance Service, Inc. (2.2 miles away, 4.7 stars from 4,697 reviews); Dakine Appliance Repair (6.9 miles away, 4.9 stars from 1,286 reviews).
GE Dryer Lines and Features
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Common GE Dryer Problems
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum turns but the air stays cool
- Burning or hot smell during a cycle
- Squealing, thumping or grinding while it runs
What a Dryer Repair Technician Checks
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Local Notes for Colorado Springs
Gas dryers in Colorado Springs are typically served by Colorado Springs Utilities. If you ever smell gas near the dryer, leave the house and call the gas utility from outside before calling a repair company. Source: Colorado Springs Utilities: Natural gas service
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
State law treats fuel gas piping separately from plumbing and has the State Plumbing Board adopt a Colorado fuel gas code for inspecting gas piping installations; hooking a gas appliance to an existing service connection falls outside the statute's definition of gas piping. Source: Colorado Revised Statutes Title 12, ยงยง 12-155-103 and 12-155-106 (Colorado General Assembly)
How to Choose a Dryer Technician Near Colorado Springs
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Colorado Springs, CO
Why do my clothes come out damp?
Should I repair or replace my GE dryer?
Which Colorado Springs technicians work on GE?
Do you work for GE?
Related Repair Pages for Colorado Springs
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.