A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Braselton
We found 40 appliance repair companies within 30 miles of Braselton. 2 of them are based in Braselton itself, and the rest are spread across Dacula (7), Buford (7), and Lawrenceville (5). Distances run up to about 14 miles. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: A1 Oven & Stove Specialists, around 1.4 miles out. Across 33 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Open on Saturdays (per listing) | 38 |
| Show laundry appliance work | 8 |
| Distance to the three closest (mi) | 1.4, 1.5, 3.6 |
| Repair companies inside 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 23 |
At the top of the Braselton list: Appliance EMT of Buford (9.7 miles away, based in Buford, 4.9 stars from 4,577 reviews, lists Saturday hours); Ge Appliance Repair Macon (88.3 miles away, based in Macon, 2.8 stars from 12 reviews, lists Saturday hours); Appliance Repair Solution of Atlanta, LLC (11.2 miles away, based in Winder, 4.8 stars from 316 reviews, lists Saturday hours); Mr. Appliance of Buford (11.6 miles away, based in Buford, 4.7 stars from 191 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
- Dryer shuts off a few minutes into the cycle
What Gets Fixed on a Braselton Dryer Call
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- Whether the dryer is gas or electric
Around Braselton
Most dryer calls in Braselton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
Georgia lists the International Fuel Gas Code among its mandatory state minimum construction codes, and permitting and inspection of gas work is handled by the local governments that enforce those codes. Source: Mandatory and Permissive State Codes (Georgia Department of Community Affairs)
Before You Book in Braselton
- Can you look at the washer on the same visit if it is acting up too?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Braselton, GA
Do you work for GE?
Which Braselton technicians work on GE?
Why does my GE dryer show an error code?
More Laundry Repair in Braselton, GA
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.