Most GE dryer repairs in Canton involve the same few systems: heat, airflow, the drum drive and the controls. The Canton list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Canton
Within 30 miles of Canton there are 40 appliance repair companies in our data. 12 of them are based in Canton itself, and other nearby bases include Woodstock (12), Alpharetta (4), and Jasper (3). Nearest on the list: Same-Day Appliance Fix in Canton, around 0.7 miles out. No company within 90 miles of Canton mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 30 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Distance to the three closest (mi) | 0.7, 0.8, 1.2 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 25 |
| Show laundry appliance work | 16 |
| Open on Saturdays (per listing) | 40 |
At the top of the Canton list: Appliance Care of Atlanta (16.2 miles away, based in Alpharetta, 4.8 stars from 2,520 reviews, lists Saturday hours); Mama Bear Dryer Vent Cleaning (15.3 miles away, based in Marietta, 5.0 stars from 561 reviews, lists Saturday hours); Sears Appliance Repair (1.2 miles away, 4.6 stars from 128 reviews, lists Saturday hours); Appliance Direct Outlet (12.1 miles away, based in Acworth, 4.6 stars from 56 reviews).
Know Your GE Dryer
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer will not start when you press Start
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
What Gets Fixed on a Canton Dryer Call
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Canton
Most dryer calls in Canton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
Georgia lists the International Fuel Gas Code among its mandatory state minimum construction codes, and permitting and inspection of gas work is handled by the local governments that enforce those codes. Source: Mandatory and Permissive State Codes (Georgia Department of Community Affairs)
Before You Book in Canton
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Canton, GA
What makes a dryer stop heating?
Why does my dryer take so long to dry?
Is this GE customer service?
What should I do about a GE error code?
More Laundry Repair in Canton, GA
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.