GE owners in Garden City usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Garden City
Our data shows 23 appliance repair companies inside a 30-mile radius of Garden City. 1 of them are based in Garden City itself, and the rest are spread across Savannah (12), Hilton Head Island (3), and Ridgeland (2). The farthest listed company is about 28 miles out. The closest is Sammy’s Appliance LLC, about 0.6 miles away. None of the repair companies near Garden City name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Across 20 rated companies, the average public rating is 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Repair companies inside 30 miles | 23 |
|---|---|
| Show laundry appliance work | 4 |
| Open on Saturdays (per listing) | 11 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Distance to the three closest (mi) | 0.6, 1.0, 2.1 |
| Mention GE | 0 |
First up for Garden City: Livingood's Inc Warehouse and Corporate Offices (2.1 miles away, based in Pooler, 4.9 stars from 161 reviews, lists Saturday hours); Griffin Appliance Repair LLC (3.6 miles away, based in Savannah, 3.7 stars from 3 reviews, lists Saturday hours); Sears Appliance Repair (6.8 miles away, based in Savannah, 3.8 stars from 116 reviews, lists Saturday hours); Advanced Appliance Services (18.3 miles away, based in Richmond Hill, 4.3 stars from 94 reviews).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
- Dryer shuts off a few minutes into the cycle
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Dryer Notes for Garden City, GA
Most dryer calls in Garden City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
Georgia lists the International Fuel Gas Code among its mandatory state minimum construction codes, and permitting and inspection of gas work is handled by the local governments that enforce those codes. Source: Mandatory and Permissive State Codes (Georgia Department of Community Affairs)
How to Choose a Dryer Technician Near Garden City
- Do you work on gas dryers, and who handles anything involving the gas line?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Garden City, GA
Why do my clothes come out damp?
Which Garden City technicians work on GE?
Why is my dryer running but not heating?
More Laundry Repair in Garden City, GA
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Garden City technician bring the right parts.