GE owners in Waimalu usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Waimalu
Within 30 miles of Waimalu there are 39 appliance repair companies in our data. Other nearby bases include Honolulu (19), Aiea (3), and Waipahu (3). Distances run up to about 18 miles. Sears Appliance Repair is the nearest, roughly 0.8 miles from Waimalu. None of the repair companies near Waimalu name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Across 34 rated companies, the average public rating is 3.9 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| List dryer or washer & dryer work | 7 |
|---|---|
| Three nearest companies, miles away | 0.8, 1.2, 1.8 |
| Companies within 30 miles | 39 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Open on Saturdays (per listing) | 24 |
| Mention GE | 0 |
Closest matches for Waimalu: Fuse Hawai'i (4.5 miles away, based in Waipahu, 4.8 stars from 278 reviews, lists Saturday hours); Sears Appliance Repair (0.8 miles away, based in Aiea, 4.2 stars from 760 reviews, lists Saturday hours); Sears Appliance Repair (8.5 miles away, based in Kaneohe, 4.8 stars from 285 reviews, lists Saturday hours); Sears Appliance Repair (1.8 miles away, based in Honolulu, 4.4 stars from 251 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Common GE Dryer Problems
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Burning or hot smell during a cycle
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Around Waimalu
Most dryer calls in Waimalu come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Hawaii has no appliance repair license classification; the Contractors License Board's specialty classifications cover related trades such as plumbing (including fuel gas piping), refrigeration, and ventilating and air conditioning, and a contractor license applies to jobs that need a building, electrical or plumbing permit. Source: Description of Contractor License Classifications (Hawaii DCCA Contractors License Board)
Installing and repairing fuel gas piping systems and their venting falls under the C-37 plumbing contractor classification, and plumbing contractors must use licensed plumbers for that work. Source: Description of Contractor License Classifications (Hawaii DCCA Contractors License Board)
Before You Book in Waimalu
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Waimalu, HI
Is my GE dryer worth repairing?
Why does my dryer take so long to dry?
Why does my GE dryer show an error code?
Is this GE customer service?
Related Repair Pages for Waimalu
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.