Most GE dryer repairs in Pearl City involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Independent GE Dryer Technicians, Pearl City HI
Within 30 miles of Pearl City there are 39 appliance repair companies in our data. 2 list an address in Pearl City, and the rest are spread across Honolulu (19), Aiea (3), and Waipahu (3). No company within 90 miles of Pearl City mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is BrightSide Appliance Repair Service, about 1.1 miles away. The 34 rated companies in range average 3.9 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 9 |
|---|---|
| Show laundry appliance work | 7 |
| Mention GE | 0 |
| Companies within 30 miles | 39 |
| Distance to the three closest (mi) | 1.1, 1.4, 1.5 |
| Open on Saturdays (per listing) | 24 |
Closest matches for Pearl City: Fuse Hawai'i (2.9 miles away, based in Waipahu, 4.8 stars from 278 reviews, lists Saturday hours); Sears Appliance Repair (1.7 miles away, based in Aiea, 4.2 stars from 760 reviews, lists Saturday hours); Sears Appliance Repair (9.7 miles away, based in Kaneohe, 4.8 stars from 285 reviews, lists Saturday hours); Sears Appliance Repair (3.1 miles away, based in Honolulu, 4.4 stars from 251 reviews, lists Saturday hours).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Pearl City
Care GE Recommends for Its Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
What Pearl City Owners Should Know
Most dryer calls in Pearl City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Hawaii has no appliance repair license classification; the Contractors License Board's specialty classifications cover related trades such as plumbing (including fuel gas piping), refrigeration, and ventilating and air conditioning, and a contractor license applies to jobs that need a building, electrical or plumbing permit. Source: Description of Contractor License Classifications (Hawaii DCCA Contractors License Board)
Installing and repairing fuel gas piping systems and their venting falls under the C-37 plumbing contractor classification, and plumbing contractors must use licensed plumbers for that work. Source: Description of Contractor License Classifications (Hawaii DCCA Contractors License Board)
Before You Book in Pearl City
- What guarantee do you give on parts and labor?
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Pearl City, HI
Why does my GE dryer show an error code?
What makes a dryer stop heating?
Is my GE dryer worth repairing?
Other Dryer Repair in Pearl City
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Pearl City technician bring the right parts.