GE owners in Rock Falls usually want two things from a repair company: experience with the brand and quick access to parts. The Rock Falls list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Rock Falls
40 repair companies serve Rock Falls from within 60 miles. The rest are spread across Freeport (6), Moline (4), and Clinton (3). Distances run up to about 46 miles. Of those, 1 mentions GE by name. Johnson Appliance Repair is the nearest, roughly 1.9 miles from Rock Falls. Rated companies nearby average 4.6 stars across 34 businesses. Rock Falls is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Rock Falls. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention GE | 1 |
|---|---|
| Repair companies inside 60 miles | 60 |
| Three nearest companies, miles away | 1.9, 3.4, 11.8 |
| Show laundry appliance work | 11 |
| Listing Saturday hours | 49 |
| With 4.5+ stars and at least 10 reviews | 15 |
First up for Rock Falls: Sears Appliance Repair (41.0 miles away, based in Peru, 4.4 stars from 70 reviews, lists Saturday hours); Sears Appliance Repair (3.4 miles away, based in Sterling, 3.3 stars from 25 reviews, lists Saturday hours); Zirkelbach Home Appliance (26.0 miles away, based in Clinton, 4.7 stars from 64 reviews, lists Saturday hours); A B Appliance Services & Repair (36.4 miles away, based in Freeport, 4.7 stars from 55 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
- Drum turns but the air stays cool
What a Dryer Repair Technician Checks
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Around Rock Falls
Most dryer calls in Rock Falls come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Questions to Ask a Rock Falls Technician
- How often do you repair GE dryers, and do you carry common parts on the truck?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Rock Falls, IL
Why does my GE dryer show an error code?
Which Rock Falls technicians work on GE?
Why is my dryer running but not heating?
Is my GE dryer worth repairing?
More Laundry Repair in Rock Falls, IL
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.