GE owners in Danville usually want two things from a repair company: experience with the brand and quick access to parts. The Danville list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Danville
40 repair companies serve Danville from within 30 miles. Other nearby bases include Indianapolis (21), Greenwood (7), and Brownsburg (2). Distances run up to about 23 miles. Nearest on the list: Avon Appliance Repair., around 6.3 miles out. No company within 30 miles of Danville names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 37 rated companies, the average public rating is 4.0 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 39 |
|---|---|
| List dryer or washer & dryer work | 17 |
| Mention GE | 0 |
| Companies within 30 miles | 60 |
| Three nearest companies, miles away | 6.3, 6.9, 8.5 |
| With 4.5+ stars and at least 10 reviews | 15 |
The leading options for Danville are Sears Appliance Repair (60.3 miles away, based in Linton, 4.4 stars from 141 reviews, lists Saturday hours); Sears Appliance Repair (69.7 miles away, based in Gas City, 4.4 stars from 37 reviews, lists Saturday hours); Capitan Appliance Repair (21.1 miles away, based in Indianapolis, 4.9 stars from 1,589 reviews, lists Saturday hours); McCollum Appliance Repair (20.2 miles away, based in Greenwood, 5.0 stars from 282 reviews).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
How a Dryer Service Call Usually Goes in Danville
Owner Care for GE Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Around Danville
Most dryer calls in Danville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Indiana licenses plumbers statewide through the Indiana Plumbing Commission but has no statewide HVAC technician license, so heating and mechanical contractor licensing, including gas appliance work, is set by individual counties and cities. Source: Indiana Department of Workforce Development NextLevel Jobs: HVAC Technician
In Indiana, you can check a license with the Indiana Professional Licensing Agency License Verification or report a problem to the Indiana Attorney General Consumer Protection Division.
Hiring a Dryer Repair Company in Danville
- Will you check the vent and lint path as part of the visit?
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Danville, IN
Do you work for GE?
Which Danville technicians work on GE?
What should I do about a GE error code?
Why does my dryer take so long to dry?
Related Repair Pages for Danville
GE Dryer Repair Near Danville
Write down any error code your GE dryer shows and when it appears. It helps a Danville technician bring the right parts.