A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Mount Washington list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Mount Washington
Our data shows 40 appliance repair companies inside a 30-mile radius of Mount Washington. Other nearby bases include Louisville (20), Clarksville (5), and Jeffersonville (3). Distances run up to about 30 miles. 1 of them mentions GE in their listing or website. Nearest on the list: Bringer Appliance Repair, around 6.5 miles out. The 37 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 19 |
|---|---|
| Open on Saturdays (per listing) | 27 |
| Show laundry appliance work | 15 |
| Distance to the three closest (mi) | 6.5, 6.9, 9.0 |
| Appliance repair companies in range (30 mi) | 40 |
| Mention GE | 1 |
The leading options for Mount Washington are Sears Appliance Repair (46.0 miles away, based in Versailles, 4.6 stars from 52 reviews, lists Saturday hours); General Electric Co (20.5 miles away, based in Jeffersonville, 4.0 stars from 38 reviews); Bodewell Appliances (14.5 miles away, based in Lyndon, 4.8 stars from 9,212 reviews, lists Saturday hours); Mr. Appliance of Louisville (15.2 miles away, based in Louisville, 4.8 stars from 988 reviews).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Squealing, thumping or grinding while it runs
- Drum turns but the air stays cool
What Gets Fixed on a Mount Washington Dryer Call
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Mount Washington Owners Should Know
Most dryer calls in Mount Washington come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Kentucky has no license category for appliance repair as such; the Department of Housing, Buildings and Construction licenses trades such as HVAC (whose scope covers installing and repairing heating, burner and cooling systems), plumbing and electrical. Source: KRS 198B.650 Definitions (Kentucky Legislative Research Commission)
In Kentucky, you can check a license with the Department of Housing, Buildings and Construction License Search and Verification or report a problem to the Kentucky Attorney General, Office of Consumer Protection.
Hiring a Dryer Repair Company in Mount Washington
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Mount Washington, KY
How do I find a technician who knows GE dryers?
What should I do about a GE error code?
Is my GE dryer worth repairing?
Do you work for GE?
Related Repair Pages for Mount Washington
GE Dryer Repair Near Mount Washington
Write down any error code your GE dryer shows and when it appears. It helps a Mount Washington technician bring the right parts.