A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Old Town list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Old Town ME
Within 60 miles of Old Town there are 11 appliance repair companies in our data. Other nearby bases include Bangor (3), Veazie (1), and Holden (1). The farthest listed company is about 52 miles out. Penobscot Appliance Repair is the nearest, roughly 8.2 miles from Old Town. None of the repair companies near Old Town name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.4 stars across 11 businesses. Old Town is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 60 miles | 11 |
|---|---|
| Listing Saturday hours | 4 |
| List dryer or washer & dryer work | 4 |
| Mention GE | 0 |
| Three nearest companies, miles away | 8.2, 8.2, 10.0 |
| With 4.5+ stars and at least 10 reviews | 5 |
At the top of the Old Town list: Dunnett Appliance & Mattress (10.5 miles away, based in Bangor, 4.3 stars from 137 reviews, lists Saturday hours); Sears Appliance Repair (8.2 miles away, based in Bangor, 4.3 stars from 12 reviews, lists Saturday hours); Brown Appliance And Mattress (33.3 miles away, based in Ellsworth, 4.6 stars from 136 reviews, lists Saturday hours); Tom's Appliance Service (10.0 miles away, based in Bangor, 4.7 stars from 26 reviews).
GE Dryer Lines and Features
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Old Town
Most dryer calls in Old Town come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maine has no general appliance repair license, but installing or servicing propane and natural gas appliances requires a Maine Fuel Board propane and natural gas technician license with an appliance connection and service authorization. Source: Maine Fuel Board - Licensing - Individual Licenses (Maine Office of Professional and Occupational Regulation)
In Maine, you can check a license with the Maine Professional and Financial Regulation Licensee Search or report a problem to the Maine Attorney General, Consumer Protection Division.
Before You Book in Old Town
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Old Town, ME
Which Old Town technicians work on GE?
Is my GE dryer worth repairing?
What should I do about a GE error code?
More Laundry Repair in Old Town, ME
GE Dryer Repair Near Old Town
Write down any error code your GE dryer shows and when it appears. It helps a Old Town technician bring the right parts.