If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Riverview
40 repair companies serve Riverview from within 30 miles. 1 of them are based in Riverview itself, and the rest are spread across Detroit (11), Lincoln Park (5), and Allen Park (3). Distances run up to about 16 miles. No company within 90 miles of Riverview mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Richard Brothers Appliance., about 0.3 miles away. Rated companies nearby average 4.2 stars across 36 businesses.
Companies are shown by relevance and distance from Riverview. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 17 |
| Distance to the three closest (mi) | 0.3, 1.4, 1.8 |
| Open on Saturdays (per listing) | 37 |
| Show laundry appliance work | 14 |
Closest matches for Riverview: Mr. Appliance of Dearborn Heights (11.7 miles away, based in Dearborn Heights, 4.5 stars from 233 reviews); Sears Appliance Repair (5.8 miles away, based in Lincoln Park, 4.6 stars from 271 reviews, lists Saturday hours); Budget Appliances and mattresses (14.0 miles away, based in Detroit, 4.6 stars from 625 reviews, lists Saturday hours); Sears Appliance Repair (15.3 miles away, based in Westland, 4.2 stars from 451 reviews, lists Saturday hours).
Know Your GE Dryer
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
What Gets Fixed on a Riverview Dryer Call
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Local Notes for Riverview
Most dryer calls in Riverview come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Hiring a Dryer Repair Company in Riverview
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Riverview, MI
Why does my GE dryer show an error code?
Why is my dryer running but not heating?
Is my GE dryer worth repairing?
Other Dryer Repair in Riverview
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.