Most Kenmore dryer repairs in Riverview involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Riverview, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Riverview
We found 40 appliance repair companies within 30 miles of Riverview. 1 of them are based in Riverview itself, and the rest are spread across Detroit (11), Lincoln Park (5), and Allen Park (3). No company within 90 miles of Riverview mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Richard Brothers Appliance. is the nearest, roughly 0.3 miles from Riverview. Rated companies nearby average 4.2 stars across 36 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| List dryer or washer & dryer work | 14 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Mention Kenmore | 0 |
| Listing Saturday hours | 37 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Three nearest companies, miles away | 0.3, 1.4, 1.8 |
Closest matches for Riverview: Sears Appliance Repair (5.8 miles away, based in Lincoln Park, 4.6 stars from 271 reviews, lists Saturday hours); Mr. Appliance of Dearborn Heights (11.7 miles away, based in Dearborn Heights, 4.5 stars from 233 reviews); Busen's Appliance (5.1 miles away, based in Lincoln Park, 4.5 stars from 191 reviews, lists Saturday hours); Budget Appliances and mattresses (14.0 miles away, based in Detroit, 4.6 stars from 625 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
- Cycles take two or three runs to finish
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Riverview
Most dryer calls in Riverview come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Hiring a Dryer Repair Company in Riverview
- Can you look at the washer on the same visit if it is acting up too?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
Kenmore Dryer Repair FAQs: Riverview, MI
What should I do about a Kenmore error code?
Should I repair or replace my Kenmore dryer?
Do you work for Kenmore?
Related Repair Pages for Riverview
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.