A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Lansing
Within 30 miles of Lansing there are 13 appliance repair companies in our data. 5 of them are based in Lansing itself, and other nearby bases include Holt (1), Bath Township (1), and Mason (1). Distances run up to about 28 miles. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Elmorique Appliance Repair Lansing, about 1.7 miles away. Across 12 rated companies, the average public rating is 4.3 stars.
Companies are shown by relevance and distance from Lansing. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| List dryer or washer & dryer work | 4 |
|---|---|
| Listing Saturday hours | 9 |
| Mention Kenmore | 0 |
| Appliance repair companies in range (30 mi) | 13 |
| Three nearest companies, miles away | 1.7, 2.4, 3.0 |
| Rated 4.5 stars or higher (10+ reviews) | 5 |
The leading options for Lansing are Sears Appliance Repair (57.8 miles away, based in Coldwater, 4.1 stars from 61 reviews, lists Saturday hours); Lane’s Appliance Sales and Service (3.2 miles away, 4.8 stars from 1,676 reviews, lists Saturday hours); Sears Appliance Repair (3.0 miles away, 4.3 stars from 311 reviews, lists Saturday hours); Gilbert’s Hardware and Appliance (27.7 miles away, based in Owosso, 4.7 stars from 573 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Dryer shuts off a few minutes into the cycle
- Burning or hot smell during a cycle
- Drum turns but the air stays cool
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- Any error code on the display
Local Notes for Lansing
Most dryer calls in Lansing come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Questions to Ask a Lansing Technician
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Lansing, MI
Which Lansing technicians work on Kenmore?
Do you work for Kenmore?
Why is my dryer running but not heating?
More Laundry Repair in Lansing, MI
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.