Kenmore owners in Warren usually want two things from a repair company: experience with the brand and quick access to parts. The Warren list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Warren work on Kenmore dryers every week.
Kenmore Dryer Repair Near Warren
We found 40 appliance repair companies within 30 miles of Warren. 5 of them are based in Warren itself, and the rest are spread across Detroit (7), Madison Heights (4), and Clinton Township (4). The farthest listed company is about 9 miles out. None of the repair companies near Warren name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. XT Appliances is the nearest, roughly 0.1 miles from Warren. Across 33 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Kenmore | 0 |
|---|---|
| Three nearest companies, miles away | 0.1, 2.1, 2.2 |
| Appliance repair companies in range (30 mi) | 60 |
| Listing Saturday hours | 43 |
| List dryer or washer & dryer work | 23 |
| With 4.5+ stars and at least 10 reviews | 21 |
The leading options for Warren are Sargent Appliance (8.3 miles away, based in Clinton Township, 4.8 stars from 690 reviews, lists Saturday hours); Conner's Repair (4.2 miles away, based in Madison Heights, 4.7 stars from 227 reviews, lists Saturday hours); Detroit Appliance (4.5 miles away, based in Fraser, 4.8 stars from 1,139 reviews, lists Saturday hours); AJ's Appliance Repair & HVAC (5.2 miles away, based in Fraser, 4.6 stars from 1,181 reviews).
Kenmore Dryer Features Technicians Work On
How Kenmore Dryers Are Built
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Drum turns but the air stays cool
- Drum will not turn even though you hear a hum
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Local Notes for Warren
Most dryer calls in Warren come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Questions to Ask a Warren Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on gas dryers, and who handles anything involving the gas line?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Warren, MI
Why does my Kenmore dryer show an error code?
Is this Kenmore customer service?
Should I repair or replace my Kenmore dryer?
Other Dryer Repair in Warren
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.