Most Kenmore dryer repairs in Grand Rapids involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Grand Rapids work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Grand Rapids
39 repair companies serve Grand Rapids from within 30 miles. 9 list an address in Grand Rapids, and the rest are spread across Holland (4), Grandville (3), and Wyoming (2). The farthest listed company is about 29 miles out. The closest is Cervona Appliance Repair Grand Rapids, about 0.9 miles away. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.5 stars across 38 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.9, 1.8, 1.9 |
|---|---|
| Open on Saturdays (per listing) | 19 |
| List dryer or washer & dryer work | 10 |
| With 4.5+ stars and at least 10 reviews | 21 |
| Mention Kenmore | 0 |
| Companies within 30 miles | 39 |
The leading options for Grand Rapids are Sears Appliance Repair (79.1 miles away, based in Coldwater, 4.1 stars from 61 reviews, lists Saturday hours); Nawara Brothers Home Store (1.9 miles away, 4.9 stars from 611 reviews, lists Saturday hours); Sears Appliance Repair (4.7 miles away, 4.6 stars from 269 reviews, lists Saturday hours); Big Lake Appliance Service (16.2 miles away, based in Conklin, 4.8 stars from 237 reviews).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Grand Rapids Owners Should Know
Most dryer calls in Grand Rapids come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Dryer Repair Company in Grand Rapids
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
Kenmore Dryer Repair FAQs: Grand Rapids, MI
Should I repair or replace my Kenmore dryer?
Why does my Kenmore dryer show an error code?
Why does my dryer take so long to dry?
Is this Kenmore customer service?
Other Dryer Repair in Grand Rapids
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.