Kenmore owners in Eaton Rapids usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Eaton Rapids, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Eaton Rapids work on Kenmore dryers every week.
Kenmore Dryer Repair Near Eaton Rapids
Within 30 miles of Eaton Rapids there are 16 appliance repair companies in our data. 1 list an address in Eaton Rapids, and other nearby bases include Lansing (5), Jackson (2), and Charlotte (1). Distances run up to about 30 miles. No company within 30 miles of Eaton Rapids names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Mighty Wrench Appliance Service is the nearest, roughly 0.3 miles from Eaton Rapids. The 15 rated companies in range average 4.0 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 3 |
|---|---|
| Distance to the three closest (mi) | 0.3, 10.5, 11.5 |
| Open on Saturdays (per listing) | 11 |
| Repair companies inside 30 miles | 16 |
| List dryer or washer & dryer work | 5 |
| Mention Kenmore | 0 |
The leading options for Eaton Rapids are Sears Appliance Repair (42.9 miles away, based in Coldwater, 4.1 stars from 61 reviews, lists Saturday hours); Lane’s Appliance Sales and Service (17.5 miles away, based in Lansing, 4.8 stars from 1,676 reviews, lists Saturday hours); Sears Appliance Repair (17.3 miles away, based in Lansing, 4.3 stars from 311 reviews, lists Saturday hours); Shaw's Appliance Service - Servicing Dansville, Mason, Leslie, Holt, Lansing and East Lansing (13.2 miles away, based in Mason, 4.0 stars from 26 reviews).
Kenmore Dryer Features Technicians Work On
How Kenmore Dryers Are Built
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- How long the vent run is and where it exits the house
Around Eaton Rapids
Most dryer calls in Eaton Rapids come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
How to Choose a Dryer Technician Near Eaton Rapids
- Do you work on gas dryers, and who handles anything involving the gas line?
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Eaton Rapids, MI
What should I do about a Kenmore error code?
Should I repair or replace my Kenmore dryer?
What makes a dryer stop heating?
Why do my clothes come out damp?
More Laundry Repair in Eaton Rapids, MI
Kenmore Dryer Repair Near Eaton Rapids
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.